For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
-
Funokata
- Full Member
- Posts: 63
- Joined: Fri Apr 01, 2022 7:42 am
- Has thanked: 2 times
- Been thanked: 5 times
Post
by Funokata » Mon May 27, 2024 12:15 pm
Hi all. Had various airbag codes for a while now. I replaced the clockspring and srs module which got rid of some codes I had previously. Now I'm stuck with 34 drivers airbag. I've checked out the connector immediately under the steering wheel, I know there is one to the left/under the glove box. Is anyone able to point me to the location of any other connectors involved in the driver's circuit and the easiest way to get to the safing sensor please? There is only one connector shown on the diagram (262)
Am I correct in thinking that the blue/orange connectors effectively "splice" together the circuits that run through the blue part? If a connector required replacing would I need to join both sets of circuits together? As in the image below

-
Micron
- Site Admin
- Posts: 3442
- Joined: Thu Sep 06, 2018 6:08 pm
- Location: South Norfolk
- Has thanked: 62 times
- Been thanked: 91 times
Post
by Micron » Mon May 27, 2024 3:03 pm
Will need to look at the workshop books, which might not be until tomorrow
Admin and Owner of this fine club
Location : South Norfolk
-
Funokata
- Full Member
- Posts: 63
- Joined: Fri Apr 01, 2022 7:42 am
- Has thanked: 2 times
- Been thanked: 5 times
Post
by Funokata » Mon May 27, 2024 11:18 pm
Much appreciated. Do they have better diagrams than the ones available on the forum? They're helpful but don't show every connector and there are a few abbreviations such as NCA which I have no idea what they mean!
-
Micron
- Site Admin
- Posts: 3442
- Joined: Thu Sep 06, 2018 6:08 pm
- Location: South Norfolk
- Has thanked: 62 times
- Been thanked: 91 times
Post
by Micron » Tue May 28, 2024 8:22 am
Funokata wrote: ↑Mon May 27, 2024 11:18 pm
Much appreciated. Do they have better diagrams than the ones available on the forum? They're helpful but don't show every connector and there are a few abbreviations such as NCA which I have no idea what they mean!
Which diagrams are you referring to on the forum?
Admin and Owner of this fine club
Location : South Norfolk
-
Micron
- Site Admin
- Posts: 3442
- Joined: Thu Sep 06, 2018 6:08 pm
- Location: South Norfolk
- Has thanked: 62 times
- Been thanked: 91 times
Post
by Micron » Tue May 28, 2024 9:51 am
Admin and Owner of this fine club
Location : South Norfolk
-
Funokata
- Full Member
- Posts: 63
- Joined: Fri Apr 01, 2022 7:42 am
- Has thanked: 2 times
- Been thanked: 5 times
Post
by Funokata » Tue May 28, 2024 6:32 pm
Thankyou so much! That's exactly what I needed. Turns out all the connectors and clockspring are good, it's the airbag module itself.
-
Micron
- Site Admin
- Posts: 3442
- Joined: Thu Sep 06, 2018 6:08 pm
- Location: South Norfolk
- Has thanked: 62 times
- Been thanked: 91 times
Post
by Micron » Tue May 28, 2024 6:35 pm
Funokata wrote: ↑Tue May 28, 2024 6:32 pm
Thankyou so much! That's exactly what I needed. Turns out all the connectors and clockspring are good, it's the airbag module itself.
You might have fun trying to get a module as you can’t post them.
Admin and Owner of this fine club
Location : South Norfolk
-
Funokata
- Full Member
- Posts: 63
- Joined: Fri Apr 01, 2022 7:42 am
- Has thanked: 2 times
- Been thanked: 5 times
Post
by Funokata » Tue May 28, 2024 6:52 pm
Yeah that makes sense....I've posted in wanted as well. I'm willing to collect in person depending on where it is
Who is online
Users browsing this forum: No registered users and 32 guests