Safing sensor
-
- Full Member
- Posts: 53
- Joined: Fri Apr 01, 2022 7:42 am
- Has thanked: 1 time
- Been thanked: 4 times
Safing sensor
Hi all. Had various airbag codes for a while now. I replaced the clockspring and srs module which got rid of some codes I had previously. Now I'm stuck with 34 drivers airbag. I've checked out the connector immediately under the steering wheel, I know there is one to the left/under the glove box. Is anyone able to point me to the location of any other connectors involved in the driver's circuit and the easiest way to get to the safing sensor please? There is only one connector shown on the diagram (262)
Am I correct in thinking that the blue/orange connectors effectively "splice" together the circuits that run through the blue part? If a connector required replacing would I need to join both sets of circuits together? As in the image below
Am I correct in thinking that the blue/orange connectors effectively "splice" together the circuits that run through the blue part? If a connector required replacing would I need to join both sets of circuits together? As in the image below
-
- Full Member
- Posts: 53
- Joined: Fri Apr 01, 2022 7:42 am
- Has thanked: 1 time
- Been thanked: 4 times
Re: Safing sensor
Much appreciated. Do they have better diagrams than the ones available on the forum? They're helpful but don't show every connector and there are a few abbreviations such as NCA which I have no idea what they mean!
-
- Site Admin
- Posts: 3335
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 61 times
- Been thanked: 89 times
Re: Safing sensor
Which diagrams are you referring to on the forum?
Admin and Owner of this fine club
-
- Site Admin
- Posts: 3335
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 61 times
- Been thanked: 89 times
Re: Safing sensor
You might have fun trying to get a module as you can’t post them.
Admin and Owner of this fine club
Who is online
Users browsing this forum: No registered users and 42 guests