ABS Codes 11, 12,13,14
-
- Site Admin
- Posts: 3358
- Joined: Thu Sep 06, 2018 6:08 pm
- Location: South Norfolk
- Has thanked: 61 times
- Been thanked: 90 times
ABS Codes 11, 12,13,14
I also read the ABS codes yesterday and came up with 12, 13 and 14 I am going to change the module first as I had a similar issue on the MX6, then look at cleaning the sensors / replacing them.
Admin and Owner of this fine club
Location : South Norfolk
Location : South Norfolk
-
- Site Admin
- Posts: 3358
- Joined: Thu Sep 06, 2018 6:08 pm
- Location: South Norfolk
- Has thanked: 61 times
- Been thanked: 90 times
Re: ABS Codes 12,13,14
Blue module is the Air Bag, it's a silver module for the ABS, which is different on a MX6, it's in a different place, different fixings and different model!
But yes I have 2
Admin and Owner of this fine club
Location : South Norfolk
Location : South Norfolk
-
- Site Admin
- Posts: 3358
- Joined: Thu Sep 06, 2018 6:08 pm
- Location: South Norfolk
- Has thanked: 61 times
- Been thanked: 90 times
Re: ABS Codes 12,13,14
Maybe, but going with the module first, because that's what happened with the MX6, replacing the module cleared 2 out of 3!
Admin and Owner of this fine club
Location : South Norfolk
Location : South Norfolk
-
- Tech Rep
- Posts: 2835
- Joined: Fri Sep 07, 2018 8:28 am
- Location: chatham/kent
- Has thanked: 15 times
- Been thanked: 88 times
Re: ABS Codes 12,13,14
i did change the reply and your right its the silver bracket with the black module left hand side
Re: ABS Codes 12,13,14
I found the rear sensors crushed to death by rust , I believe later , post '94 models , had a PTFE sleeve in the sensor hole for the stainless steel can to fit into.
Again, it is hard to understand why the ABS control module should fail , ie How many ECU failures do you know of ? None.
Again, it is hard to understand why the ABS control module should fail , ie How many ECU failures do you know of ? None.
-
- Site Admin
- Posts: 3358
- Joined: Thu Sep 06, 2018 6:08 pm
- Location: South Norfolk
- Has thanked: 61 times
- Been thanked: 90 times
Re: ABS Codes 12,13,14
I had one on the MX6, as that was showing up several faults, I changed the module and that cleared 2 of the 3, then i changed a single sensor and it's all goodjrh wrote: ↑Wed May 19, 2021 10:27 amI found the rear sensors crushed to death by rust , I believe later , post '94 models , had a PTFE sleeve in the sensor hole for the stainless steel can to fit into.
Again, it is hard to understand why the ABS control module should fail , ie How many ECU failures do you know of ? None.
Admin and Owner of this fine club
Location : South Norfolk
Location : South Norfolk
-
- Site Admin
- Posts: 3358
- Joined: Thu Sep 06, 2018 6:08 pm
- Location: South Norfolk
- Has thanked: 61 times
- Been thanked: 90 times
Re: ABS Codes 11, 12,13,14
Well I changed the ABS module twice today and still no change, so tomorrow I will mostly be cleaning and maybe changing ABS sensors, oh joy!
Admin and Owner of this fine club
Location : South Norfolk
Location : South Norfolk
Who is online
Users browsing this forum: No registered users and 24 guests