ABS Codes 11, 12,13,14

Post by **Micron** » Wed May 19, 2021 8:16 am

I also read the ABS codes yesterday and came up with 12, 13 and 14

I am going to change the module first as I had a similar issue on the MX6, then look at cleaning the sensors / replacing them.

Post by **cpt black** » Wed May 19, 2021 8:51 am

Would change the Module over Trev ,hope you have the spare from the breaker

Post by **Micron** » Wed May 19, 2021 8:56 am

cpt black wrote: ↑
Wed May 19, 2021 8:51 am
Would change the Module over Trev ,hope you have the spare from the breaker take the
Blue unit apart as may be the Thermal fuse blown

Blue module is the Air Bag, it's a silver module for the ABS, which is different on a MX6, it's in a different place, different fixings and different model!

But yes I have 2

Post by **Kit** » Wed May 19, 2021 9:11 am

Looks like you may have to change a few wheel sensor’s

Kit

Post by **Micron** » Wed May 19, 2021 9:20 am

Kit wrote: ↑
Wed May 19, 2021 9:11 am
Looks like you may have to change a few wheel sensor’s

Kit

Maybe, but going with the module first, because that's what happened with the MX6, replacing the module cleared 2 out of 3!

Post by **cpt black** » Wed May 19, 2021 9:45 am

Micron wrote: ↑
Wed May 19, 2021 8:56 am

cpt black wrote: ↑
Wed May 19, 2021 8:51 am
Would change the Module over Trev ,hope you have the spare from the breaker take the
Blue unit apart as may be the Thermal fuse blown
Blue module is the Air Bag, it's a silver module for the ABS, which is different on a MX6, it's in a different place, different fixings and different model!

But yes I have 2

i did change the reply

and your right its the silver bracket with the black module left hand side

Post by **jrh** » Wed May 19, 2021 10:27 am

I found the rear sensors crushed to death by rust , I believe later , post '94 models , had a PTFE sleeve in the sensor hole for the stainless steel can to fit into.
Again, it is hard to understand why the ABS control module should fail , ie How many ECU failures do you know of ? None.

Post by **Micron** » Wed May 19, 2021 10:35 am

jrh wrote: ↑
Wed May 19, 2021 10:27 am
I found the rear sensors crushed to death by rust , I believe later , post '94 models , had a PTFE sleeve in the sensor hole for the stainless steel can to fit into.
Again, it is hard to understand why the ABS control module should fail , ie How many ECU failures do you know of ? None.

I had one on the MX6, as that was showing up several faults, I changed the module and that cleared 2 of the 3, then i changed a single sensor and it's all good

Post by **Micron** » Sat May 29, 2021 6:25 pm

Well I changed the ABS module twice today and still no change, so tomorrow I will mostly be cleaning and maybe changing ABS sensors, oh joy!

UKPOC forums

ABS Codes 11, 12,13,14

ABS Codes 11, 12,13,14

Re: ABS Codes 12,13,14

Re: ABS Codes 12,13,14

Re: ABS Codes 12,13,14

Re: ABS Codes 12,13,14

Re: ABS Codes 12,13,14

Re: ABS Codes 12,13,14

Re: ABS Codes 12,13,14

Re: ABS Codes 11, 12,13,14

Who is online