Speedo drive removal

Post by **Micron** » Sat Nov 21, 2020 2:10 pm

Once I have taken the bolt out of the Speedo drive, will the sensor move side to side to help free it if it's persuaded a bit?

Post by **mojo98** » Sat Nov 21, 2020 3:02 pm

No it won't move side to side because it sat on a little stud, once it's above the stud then it will move side to side

Here is a picture of one,

Post by **Micron** » Sat Nov 21, 2020 3:52 pm

How do I get it out then?

Post by **sockett 1962 ][** » Sat Nov 21, 2020 4:38 pm

this is something i need to do aswell had a look and its in a awful position for now i have a gps speedo but any tips would be good

Post by **mojo98** » Sat Nov 21, 2020 6:13 pm

Well I've never (touch wood) changed one.
But have seen one removed but that was with a big hammer, and guess what

It snapped,

My suggestion would be remove the fixing both then loads and loads of wd40, then leave it, letting it soak in then with a very thin bladed screw driver, try and ease it up

Ask Aaron how he changed his, he may be able to put a view on it,
There again if it not working does it matter if you damage it while removing it

Post by **Micron** » Sat Nov 21, 2020 7:28 pm

I'm trying to save the one from the breaker, so don't to break it if possible

UKPOC forums

Speedo drive removal

Speedo drive removal

Re: Speedo drive removal

Re: Speedo drive removal

Re: Speedo drive removal

Re: Speedo drive removal

Re: Speedo drive removal

Who is online