copper crush washers

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
paulinpoole
Full Member
Posts: 58
Joined: Sun Sep 16, 2018 6:16 pm

copper crush washers

Post by paulinpoole » Sat Aug 03, 2019 9:39 am

Does anyone know the size of the copper crush washers we use on the rear brake hose/calipers please.
i bought a metric set from halfrauds and the two sizes that are closest are not quite right
(slightly too big to fit in the shape on the caliper,but fit the banjo bolt perfect)
and getting a very very slight leak,so need to change them
thanks in advance 8-)

UNPEELED & RETEALED ;)

Kit
Tech Rep
Posts: 552
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 4 times
Been thanked: 9 times

Re: copper crush washers

Post by Kit » Sun Aug 04, 2019 5:41 pm

Paul,
Don’t know the size, but could find you an used OME one, if that’s an good :)

Kit

paulinpoole
Full Member
Posts: 58
Joined: Sun Sep 16, 2018 6:16 pm

Re: copper crush washers

Post by paulinpoole » Mon Aug 05, 2019 10:11 am

hi kit,
thanks bud :)
im going down to screwfix first today,b&q or a local car shop
ive got a old one to try to size up,
if i find a good size i will post it up for future reference for us all 8-)

paulinpoole
Full Member
Posts: 58
Joined: Sun Sep 16, 2018 6:16 pm

Re: copper crush washers

Post by paulinpoole » Sun Aug 11, 2019 8:48 pm

i measured old washer with a caliper and the size is M10x15x1mm
i got some from ebay and all good 8-)

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest