For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
-
paulinpoole
- Full Member
- Posts: 192
- Joined: Sun Sep 16, 2018 6:16 pm
- Location: Poole Dorset
- Been thanked: 1 time
Post
by paulinpoole » Sat Aug 03, 2019 9:39 am
Does anyone know the size of the copper crush washers we use on the rear brake hose/calipers please.
i bought a metric set from halfrauds and the two sizes that are closest are not quite right
(slightly too big to fit in the shape on the caliper,but fit the banjo bolt perfect)
and getting a very very slight leak,so need to change them
thanks in advance
UNPEELED & RETEALED
-
Kit
- Tech Rep
- Posts: 3559
- Joined: Fri Sep 07, 2018 8:16 pm
- Location: Vange, Basildon
- Has thanked: 71 times
- Been thanked: 115 times
Post
by Kit » Sun Aug 04, 2019 5:41 pm
Paul,
Don’t know the size, but could find you an used OME one, if that’s an good
Kit
-
paulinpoole
- Full Member
- Posts: 192
- Joined: Sun Sep 16, 2018 6:16 pm
- Location: Poole Dorset
- Been thanked: 1 time
Post
by paulinpoole » Mon Aug 05, 2019 10:11 am
hi kit,
thanks bud
im going down to screwfix first today,b&q or a local car shop
ive got a old one to try to size up,
if i find a good size i will post it up for future reference for us all
-
paulinpoole
- Full Member
- Posts: 192
- Joined: Sun Sep 16, 2018 6:16 pm
- Location: Poole Dorset
- Been thanked: 1 time
Post
by paulinpoole » Sun Aug 11, 2019 8:48 pm
i measured old washer with a caliper and the size is M10x15x1mm
i got some from ebay and all good
Who is online
Users browsing this forum: Bing [Bot] and 44 guests