high idle 1200 odds 24v

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
Rikki5
Registered User
Posts: 20
Joined: Sat Sep 08, 2018 10:43 pm

high idle 1200 odds 24v

Post by Rikki5 » Sat Nov 02, 2019 11:57 am

Hi all on from repairing the engine fire damage car now idles at 1250 rpm idle screw all way in (adjusted in test mode) changed MAF unit (thanks Malc) coolant is spot on now thinking throttle body may need cleaned .what is involved in this and any special things ineex to look out for (how do you clean the unit) cheers inavance rikki
Last edited by Rikki5 on Sat Nov 02, 2019 3:16 pm, edited 1 time in total.
Top
Sunfly
Full Member
Posts: 1026
Joined: Fri Sep 07, 2018 9:11 am
Been thanked: 23 times

Re: high idle 1200 odds

Post by Sunfly » Sat Nov 02, 2019 1:25 pm

are you 16 or 24v Rikki. They are different.
Top
cpt black
Tech Rep
Posts: 2824
Joined: Fri Sep 07, 2018 8:28 am
Has thanked: 15 times
Been thanked: 88 times

Re: high idle 1200 odds 24v

Post by cpt black » Sat Nov 02, 2019 4:23 pm

Hi Rikki
If you have set the base idle and TPS when up to temp(and linked out)
you may have a sticking IAC valve,if your gonna do the carb its an
ideal time to do it,just remember there is a fine rubber gasket under
neath it, I used carb cleaner on mine
Also check the throttle cable is returning to its stop
Top
Rikki5
Registered User
Posts: 20
Joined: Sat Sep 08, 2018 10:43 pm

Re: high idle 1200 odds 24v

Post by Rikki5 » Sat Nov 02, 2019 5:35 pm

Hi CPT when in test mode as soon as you move throttle fans come on go off when release throttle .what is involved in cleaning the throttle body do I just spraywith carb cleaner and wipe clean can I use air pressure to blow through parts .
Top
cpt black
Tech Rep
Posts: 2824
Joined: Fri Sep 07, 2018 8:28 am
Has thanked: 15 times
Been thanked: 88 times

Re: high idle 1200 odds 24v

Post by cpt black » Sat Nov 02, 2019 5:56 pm

Hi Rikki
Wot is your base idle when linked out :?: TPS is doing wot it should when linked
out,I would take the carb off complete 4 nuts( Remove Throttle cable first) then
Your see the gunk in the holes clean out with carb cleaner,then unscrew the IAC
And fill with carb cleaner leave to soak your be surprised at the crap that comes out
which stops the wax stat from fully returning
Last edited by cpt black on Sun Nov 03, 2019 6:28 am, edited 1 time in total.
Top
Rikki5
Registered User
Posts: 20
Joined: Sat Sep 08, 2018 10:43 pm

Re: high idle 1200 odds 24v

Post by Rikki5 » Sat Nov 02, 2019 6:48 pm

Hi idle goes to around 1000 rpm will take off throttle body and clean it and iac valve.cheers
Does cleaning normally work or should I get a replacment.
Top
cpt black
Tech Rep
Posts: 2824
Joined: Fri Sep 07, 2018 8:28 am
Has thanked: 15 times
Been thanked: 88 times

Re: high idle 1200 odds 24v

Post by cpt black » Sat Nov 02, 2019 7:07 pm

It usually cures the problem,if not it will lie in the egr valve but thats a different
thing to do,start the IAC first ;)
Top
Rikki5
Registered User
Posts: 20
Joined: Sat Sep 08, 2018 10:43 pm

Re: high idle 1200 odds 24v

Post by Rikki5 » Sun Nov 10, 2019 5:51 pm

Hi cleaned throttle body took iac valve off and tried some boiling water in it valve moves and moves back when cold water is poured in moves about 5mm is this about right as have it all back together and still 1200 idle any other ideas as what to do next cheers in advance.
Top
Post Reply

Return to “The Garage - Technical Forum”

Who is online

Users browsing this forum: Bing [Bot] and 32 guests