For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
-
Redaxe54
- Registered User
- Posts: 3
- Joined: Sat Aug 03, 2019 4:54 pm
Post
by Redaxe54 » Sun Aug 04, 2019 9:22 am
-
jrh
- Full Member
- Posts: 1054
- Joined: Thu Sep 20, 2018 3:08 pm
- Been thanked: 44 times
Post
by jrh » Sun Aug 04, 2019 9:32 am
It's not the mileage that matters, it is the amount and whereabouts of the rust that make the decision to scrap or save.
-
Redaxe54
- Registered User
- Posts: 3
- Joined: Sat Aug 03, 2019 4:54 pm
Post
by Redaxe54 » Sun Aug 04, 2019 10:30 am
Do they sell replacement panels for the Probe yet? Or repair panels?
-
jrh
- Full Member
- Posts: 1054
- Joined: Thu Sep 20, 2018 3:08 pm
- Been thanked: 44 times
Post
by jrh » Sun Aug 04, 2019 11:57 am
First, how bad is the rust ?
If serious and you cannot fix it, then it will cost £X000.'s.
Next, getting the engine to run.
Is the timing belt broken ?
If so, fix it, £100 for parts or £500 if garage does it.
Still no guarantee it will run but certainly won't if not done !
If it runs , you have a 'runner', with every chance it will continue to give good service.
-
Slick
- Full Member
- Posts: 914
- Joined: Fri Sep 07, 2018 4:07 pm
- Been thanked: 12 times
Post
by Slick » Sun Aug 04, 2019 4:07 pm
It’s non interference engine, so if belt has gone it ain’t the end of the world

-
Incognito
- Full Member
- Posts: 2291
- Joined: Thu Sep 06, 2018 9:27 pm
- Location: Lincoln
- Has thanked: 48 times
- Been thanked: 18 times
Post
by Incognito » Sun Aug 04, 2019 5:10 pm
Aaron front bumper looks ok if the car is to be broken .
-
Scooby
- Registered User
- Posts: 488
- Joined: Fri Sep 21, 2018 11:49 am
- Has thanked: 4 times
- Been thanked: 3 times
Post
by Scooby » Mon Aug 05, 2019 10:30 am
Looking at the pictures, the biggest issues are going to be the body rust and the door rubbers. The ones you've got appear really quite bubbly, meaning they probably won't last much longer before starting to let water in.
The front wing isn't too much of a problem as replacements can be found, but the rear wheel arches will need repairing, or replacements fabricating as they're not available. You might be able to find another rust free example to steal them from, but you'd probably be better getting that one on the road rather than trying to swap body panels over.
While I'd love to see another one back on the road, it all depends on how much you're willing to spend on a future classic and whether you're in it for the long-haul or looking to get it done and sell it on quickly. If the former then fine, if the latter then they're not worth overly much at present so it depends how much you're looking to get out of it.
Member no: 227
Location: Banks, Nr Preston, Lancs.
Drives: 2x 24V - Japha and Chewie

-
Redaxe54
- Registered User
- Posts: 3
- Joined: Sat Aug 03, 2019 4:54 pm
Post
by Redaxe54 » Mon Aug 05, 2019 10:19 pm
Thanks everyone for your time and advice. I've purchased a timing belt kit and will fit it when it arrives. Fingers crossed.
Fyi most of my restoration experience is with Mgb's which are much more rusty. But the replacement parts are also more readily available.
Who is online
Users browsing this forum: No registered users and 42 guests