emissions

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
peterb1126
Registered User
Posts: 20
Joined: Sat Jul 06, 2019 1:59 pm

emissions

Post by peterb1126 » Wed Jul 31, 2019 7:05 pm

Having problems trying to get my 16v Probes through MOT test....fail on emissions even when engine hot and redex treatment etc...any suggestions thnx

mmm24v
Registered User
Posts: 282
Joined: Thu Sep 06, 2018 9:54 pm
Has thanked: 3 times

Re: emissions

Post by mmm24v » Wed Jul 31, 2019 7:14 pm

A lot of people swear by additives like cataclysm,assume you've already changed oil & plugs

Believe an oem catalytic converter is nigh on essential for a mot pass too

A proper tech should be along shortly to give definitive answers

mojo98
Tech Rep
Posts: 2627
Joined: Thu Sep 06, 2018 10:52 pm
Has thanked: 41 times
Been thanked: 55 times

Re: emissions

Post by mojo98 » Wed Jul 31, 2019 8:31 pm

Change the Spark Plugs, Air Fliter
pull the Codes
may need to O2 sensors


I`ve never used any additives, Few year ago one of my probes was just passed on emission, and the test told me to get my engine tuned, but i didnt and the next year it flew thro the emissions, the tester asked me what i did, told me changed to plugs and both o2 sensors, and I always give the car a blast and get them really hot and then take it in and make them do the emissions straight away. and I have no issues

ICKLE
Site Admin
Posts: 534
Joined: Thu Sep 06, 2018 8:42 pm

Re: emissions

Post by ICKLE » Wed Jul 31, 2019 10:45 pm

very very lazy cats on these cars and they have to be extra hot..

Kit
Tech Rep
Posts: 3551
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 71 times
Been thanked: 115 times

Re: emissions

Post by Kit » Thu Aug 01, 2019 10:21 am

Has the car got an OME cat or a ‘cheap’ Aftermarket one :?: , these do struggle after a few years

Kit

User avatar
Scooby
Registered User
Posts: 488
Joined: Fri Sep 21, 2018 11:49 am
Has thanked: 4 times
Been thanked: 3 times

Re: emissions

Post by Scooby » Thu Aug 01, 2019 10:48 am

My emissions issue was caused by a faulty connection on the ECU. Faulty connection was caused by corrosion on the contacts.
Member no: 227
Location: Banks, Nr Preston, Lancs.
Drives: 2x 24V - Japha and Chewie
Image

fanman
Full Member
Posts: 137
Joined: Fri Sep 14, 2018 10:05 am
Has thanked: 2 times
Been thanked: 6 times

Re: emissions

Post by fanman » Thu Aug 01, 2019 3:29 pm

WHERE do you get OEM cat from :?: Guessing theyre very pricey :?:

User avatar
Scooby
Registered User
Posts: 488
Joined: Fri Sep 21, 2018 11:49 am
Has thanked: 4 times
Been thanked: 3 times

Re: emissions

Post by Scooby » Thu Aug 01, 2019 3:55 pm

Not sure you can buy an OEM one any longer, but after market ones are available on eBay from about £50.

https://www.ebay.co.uk/i/332358136302
https://www.ebay.co.uk/p/BM90284-BM-Cat ... 6961&rt=nc
Member no: 227
Location: Banks, Nr Preston, Lancs.
Drives: 2x 24V - Japha and Chewie
Image

Kit
Tech Rep
Posts: 3551
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 71 times
Been thanked: 115 times

Re: emissions

Post by Kit » Thu Aug 01, 2019 4:50 pm

Remember,
There's two sizes of CAT on 16V

400mm early
440mm late

Kit

peterb1126
Registered User
Posts: 20
Joined: Sat Jul 06, 2019 1:59 pm

Re: emissions

Post by peterb1126 » Fri Aug 02, 2019 8:14 am

thanks to all for the advice ...will make a note and chat to the garage who do try to keep the car on the road !

Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests