16v idle speed adjustment

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
Andy kay93
Full Member
Posts: 239
Joined: Sun Apr 14, 2019 3:19 pm

16v idle speed adjustment

Post by Andy kay93 » Sun Jul 28, 2019 12:34 pm

Hi, anybody know how to adjust idle speed on 16v mines
About 1500rpm? constant not hunting or erratic since I unblocked coolant flow around throttle body today
Cheers
Andy
Top
paulinpoole
Full Member
Posts: 192
Joined: Sun Sep 16, 2018 6:16 pm
Location: Poole Dorset
Been thanked: 1 time

Re: 16v idle speed adjustment

Post by paulinpoole » Mon Jul 29, 2019 9:16 pm

if you look at the throttlebody standing on the passengerside of car,you will see a deepish hole with a large (approx 10mm) slotted screw in the hole turn one way to increase other to decrease revs,that failing possibly the tps or timing needs adjustment

https://www.youtube.com/watch?v=f_VQacbOhhg 3 minutes 47 seconds in video shows screw
8-)
Top
Andy kay93
Full Member
Posts: 239
Joined: Sun Apr 14, 2019 3:19 pm

Re: 16v idle speed adjustment

Post by Andy kay93 » Tue Jul 30, 2019 3:14 pm

Thankyou much appreciated 😀
Top
Jon G 24V
Tech Rep
Posts: 662
Joined: Fri Sep 07, 2018 8:05 pm
Has thanked: 1 time
Been thanked: 7 times

Re: 16v idle speed adjustment

Post by Jon G 24V » Tue Jul 30, 2019 3:17 pm

To set the Base Idle you will need to put the link between TEN and GND in the Diagnostics Box ;)
Top
Andy kay93
Full Member
Posts: 239
Joined: Sun Apr 14, 2019 3:19 pm

Re: 16v idle speed adjustment

Post by Andy kay93 » Wed Jul 31, 2019 8:28 am

Ok thankyou😀
Top
Post Reply

Return to “The Garage - Technical Forum”

Who is online

Users browsing this forum: No registered users and 39 guests