Hi guys,
1994 2l, can't get the handbrake cables off the rear calipers. Turning the adjustment nut at the rear just spins, can I adjust something elsewhere? Was following this guide: http://probefaq.org/service/rear-pads.html
Any help greatly appreciated.
Removing handbrake cables
-
- Tech Rep
- Posts: 2867
- Joined: Fri Sep 07, 2018 8:28 am
- Location: chatham/kent
- Has thanked: 15 times
- Been thanked: 88 times
Re: Removing handbrake cables
release the hand brake,take the cable clip off then push the the lever forward on the cable
to release the cable nipple and the cable can be pulled backwards out of the holder
to release the cable nipple and the cable can be pulled backwards out of the holder
Re: Removing handbrake cables
Sorry still not getting it - do I have to go into the car andremove it from there?
-
- Site Admin
- Posts: 3457
- Joined: Thu Sep 06, 2018 6:08 pm
- Location: South Norfolk
- Has thanked: 62 times
- Been thanked: 91 times
Re: Removing handbrake cables
If you are just trying to remove the cable from the calliper, then no
Where you were trying to adjust the cable (never known anyone adjust it there before) there is a U shaped metal clip. Remove the clip, pull the outer cable towards the front of the car slightly, then you can slide it out and then unhook it from the calliper
Admin and Owner of this fine club 
Location : South Norfolk
Location : South Norfolk
Who is online
Users browsing this forum: No registered users and 37 guests