For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
-
KBUK
- Registered User
- Posts: 100
- Joined: Tue Sep 18, 2018 1:56 pm
Post
by KBUK » Fri Jun 14, 2019 7:41 pm
Hello chaps,
Just spent a load of cash getting CV half shafts done on front of car.. then on way home today breaks didn't seem to slow me down much.
I need a front bumper, radiator, bonnet, rad fans, and driver side headlight and frame that rad attaches to... Does anyone think this is possible to fix?
-
cpt black
- Tech Rep
- Posts: 2824
- Joined: Fri Sep 07, 2018 8:28 am
- Has thanked: 15 times
- Been thanked: 88 times
Post
by cpt black » Fri Jun 14, 2019 8:32 pm
Duncan aka Kit should have most of the parts needed mate
I have a 24v rad with fans here,i would strip the bumper off
then measure from the bulk head on the nearside to the
front crossmember as it seems un affected then the same
on the off side to see if any difference
then go from there
-
mojo98
- Tech Rep
- Posts: 2627
- Joined: Thu Sep 06, 2018 10:52 pm
- Has thanked: 41 times
- Been thanked: 55 times
Post
by mojo98 » Fri Jun 14, 2019 8:55 pm
oh dear,
hopefully as Kev says strip things down and check there`s no damage to the front cross member,
-
mmm24v
- Registered User
- Posts: 282
- Joined: Thu Sep 06, 2018 9:54 pm
- Has thanked: 3 times
Post
by mmm24v » Fri Jun 14, 2019 9:18 pm
Firstly oh crap,we'll do our best to get you back up and running
If those chaps can't help you I might be able to step in
I have a radiator with fans & a black front bumper
-
Twizzle
- Registered User
- Posts: 111
- Joined: Fri Sep 07, 2018 7:58 pm
- Has thanked: 4 times
- Been thanked: 1 time
Post
by Twizzle » Fri Jun 14, 2019 9:22 pm
If you get stuck I'm sure I have a front bumper here but wrong colour if it helps
-
Kit
- Tech Rep
- Posts: 3551
- Joined: Fri Sep 07, 2018 8:16 pm
- Has thanked: 71 times
- Been thanked: 115 times
Post
by Kit » Fri Jun 14, 2019 10:02 pm
Yep, bumper here , in black if you need it.
Bonnet, wings, etc
Other bit if you needed them
Kit
Last edited by
Kit on Sat Jun 15, 2019 11:14 am, edited 1 time in total.
-
KBUK
- Registered User
- Posts: 100
- Joined: Tue Sep 18, 2018 1:56 pm
Post
by KBUK » Fri Jun 14, 2019 10:47 pm
Thanks everyone for the responses. Will access extent of damage tomorrow and get back with What's needed.
) Feel much better about it now
-
Andy W
- Full Member
- Posts: 503
- Joined: Thu Sep 06, 2018 11:49 pm
- Has thanked: 1 time
- Been thanked: 2 times
Post
by Andy W » Sat Jun 15, 2019 12:12 am
That sucks. What bad Luck.
Don't want to be the bearer of bad news but the panel in front of the radiator is badly bent and a good way back, I''m looking at the angle of the headlights too - check the chassis legs aren't twisted.
-
el plates
- Full Member
- Posts: 220
- Joined: Thu Sep 06, 2018 9:24 pm
Post
by el plates » Sat Jun 15, 2019 7:28 am
lots of good offers of help,
i may have some bits too,
depends on who is nearest to you, especially with things like bonnets......
all the best
-
Kit
- Tech Rep
- Posts: 3551
- Joined: Fri Sep 07, 2018 8:16 pm
- Has thanked: 71 times
- Been thanked: 115 times
Post
by Kit » Sat Jun 15, 2019 9:48 am
But, why didn’t you stop!
The brakes on a Probe are generally quiet good, it there maintained
When was the last time the brake fluid was changed
Are the front pads really worn
When the drive shafts where changed, did the brake get ‘messed with.
Just a thought
Regards
Kit
Who is online
Users browsing this forum: Majestic-12 [Bot] and 24 guests
