HT Lead Brackets 24v

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
Twizzle
Registered User
Posts: 111
Joined: Fri Sep 07, 2018 7:58 pm
Has thanked: 4 times
Been thanked: 1 time

HT Lead Brackets 24v

Post by Twizzle » Sun May 12, 2019 4:56 pm

Who said HT lead brackets aren't available :D Full set of Black, tried the blue one but doesn't quite go with red leads :lol: but no more saggy untidy leads 8-)

Image
Last edited by Twizzle on Sat May 18, 2019 6:16 pm, edited 1 time in total.
Top
Kit
Tech Rep
Posts: 3551
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 71 times
Been thanked: 115 times

Re: HT Lead Brackets

Post by Kit » Sun May 12, 2019 6:21 pm

Where did you get these from :?:

I thought I was luck to get some in a set of leads I purchased from Rockauto’s in the states

Kit
Top
Twizzle
Registered User
Posts: 111
Joined: Fri Sep 07, 2018 7:58 pm
Has thanked: 4 times
Been thanked: 1 time

Re: HT Lead Brackets

Post by Twizzle » Sun May 12, 2019 6:27 pm

I made them 🤓
Top
Twizzle
Registered User
Posts: 111
Joined: Fri Sep 07, 2018 7:58 pm
Has thanked: 4 times
Been thanked: 1 time

Re: HT Lead Brackets

Post by Twizzle » Sun May 12, 2019 6:30 pm

But I made them to fit 8mm leads as I believe the standard is 7mm?
Top
Kit
Tech Rep
Posts: 3551
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 71 times
Been thanked: 115 times

Re: HT Lead Brackets

Post by Kit » Sun May 12, 2019 8:08 pm

Twizzle wrote: ↑
Sun May 12, 2019 6:27 pm
I made them 🤓
“3” D printer :?: :idea:

Very clever :D

Kit
Top
Twizzle
Registered User
Posts: 111
Joined: Fri Sep 07, 2018 7:58 pm
Has thanked: 4 times
Been thanked: 1 time

Re: HT Lead Brackets

Post by Twizzle » Sun May 12, 2019 8:10 pm

Yep thought I’d put it to good use :D
Top
Jon G 24V
Tech Rep
Posts: 659
Joined: Fri Sep 07, 2018 8:05 pm
Has thanked: 1 time
Been thanked: 7 times

Re: HT Lead Brackets

Post by Jon G 24V » Sun May 12, 2019 9:54 pm

Nice job mate, think might get a few requests for these 😎
Top
fuerte
Registered User
Posts: 884
Joined: Fri Sep 07, 2018 10:10 am
Has thanked: 22 times
Been thanked: 1 time

Re: HT Lead Brackets

Post by fuerte » Mon May 13, 2019 9:03 am

Twizzle wrote: ↑
Sun May 12, 2019 6:30 pm
 But I made them to fit 8mm leads as I believe the standard is 7mm?
Good job.I am up for a set as I have 8 mm leads.black please.if you selling let me know cost and om paypal.
And you are right standard 7 mm performance 8 mm but iI think you can get 10 mm leads too.
Top
Twizzle
Registered User
Posts: 111
Joined: Fri Sep 07, 2018 7:58 pm
Has thanked: 4 times
Been thanked: 1 time

Re: HT Lead Brackets

Post by Twizzle » Mon May 13, 2019 10:52 am

I'm happy to make these if anybody is interested. For those that are familiar with 3D printing they take over 13hrs to print as I make them as a solid unit for strength and not hollow, which is the standard procedure, which in turn means they use quite a lot of filament (material) so not cheap on material or electric. They're printed in ABS which has a melting point of 500F or 260c. At the moment I can make them in Black or Blue, looking to do some in red but need to make an order up for the filament as buying a single roll isn't cheap (£5.00 postage on top of the price for a single roll). I can't do them any cheaper than £10 for a full set to full members only :) If anybody is interested just let me know and I can drop them off at fest :D
Top
Twizzle
Registered User
Posts: 111
Joined: Fri Sep 07, 2018 7:58 pm
Has thanked: 4 times
Been thanked: 1 time

Re: HT Lead Brackets

Post by Twizzle » Mon May 13, 2019 10:54 am

Jon G 24V wrote: ↑
Sun May 12, 2019 9:54 pm
 Nice job mate, think might get a few requests for these 😎
My brother is looking into getting me some sample MK1 Capri clips for me to model and print as he has a friend that needs some, seen two for sale on eBay for £23.00 :o
Top
Post Reply

Return to “The Garage - Technical Forum”

Who is online

Users browsing this forum: No registered users and 12 guests