For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
-
Kit
- Tech Rep
- Posts: 3551
- Joined: Fri Sep 07, 2018 8:16 pm
- Has thanked: 71 times
- Been thanked: 115 times
Post
by Kit » Fri Apr 19, 2019 8:33 pm
Mickaleen59 wrote: ↑Fri Apr 19, 2019 8:10 pm
Ordered 3 handbrake cables for the Probe they are "Japanparts BC 300 and BC301" for left and right.and "Firstline FKB 1728" for the centre cable.
When mechanic went to fit them he said they were the wrong cables, the ones on the car has different fittings he says. The thing is, when I look up the part numbers on the Japanparts website it says those cables suit all year Probes and Mazda mx6 and 626's and Xedos.
I've looked up lots of other brand names on eBay etc and they all look the same as the Japanparts cables, there doesn't seem to be any others with different fittings!!!
Question is, has anyone come across this situation before and is there any variations of fittings?
All ideas, solutions etc welcome please.
Yes,
The Boss today
But it was easily sorted
Kit
-
Mickaleen59
- Registered User
- Posts: 64
- Joined: Wed Mar 13, 2019 7:45 pm
Post
by Mickaleen59 » Fri Apr 19, 2019 9:04 pm
Kit wrote: ↑Fri Apr 19, 2019 8:33 pm
Mickaleen59 wrote: ↑Fri Apr 19, 2019 8:10 pm
Ordered 3 handbrake cables for the Probe they are "Japanparts BC 300 and BC301" for left and right.and "Firstline FKB 1728" for the centre cable.
When mechanic went to fit them he said they were the wrong cables, the ones on the car has different fittings he says. The thing is, when I look up the part numbers on the Japanparts website it says those cables suit all year Probes and Mazda mx6 and 626's and Xedos.
I've looked up lots of other brand names on eBay etc and they all look the same as the Japanparts cables, there doesn't seem to be any others with different fittings!!!
Question is, has anyone come across this situation before and is there any variations of fittings?
All ideas, solutions etc welcome please.
Yes,
The Boss today
But it was easily sorted
Kit
Are U saying that these cables do fit, or what has to be done to make them fit?
-
Kit
- Tech Rep
- Posts: 3551
- Joined: Fri Sep 07, 2018 8:16 pm
- Has thanked: 71 times
- Been thanked: 115 times
Post
by Kit » Fri Apr 19, 2019 9:34 pm
I'll let Micron, tell the full details, as he was the cable changer today
Kit
-
Micron
- Site Admin
- Posts: 3335
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 61 times
- Been thanked: 89 times
Post
by Micron » Fri Apr 19, 2019 10:12 pm
Yes, I changed all three cables today, I was only going to change the two handed cables, but had to change the adjuster cable because the nipples on the handed cables were different sizes to the holes on the adjuster cable!
The when I went to fit them, the why they are achoured is also different, I had to get some retaining clips use daily on the other end of the brakes to hold them in place.
It was the first time I had ever done it, and thankfully no studs were broken
Admin and Owner of this fine club
-
Mickaleen59
- Registered User
- Posts: 64
- Joined: Wed Mar 13, 2019 7:45 pm
Post
by Mickaleen59 » Fri Apr 26, 2019 9:41 pm
It's sorted, finally☺
Convinced the mechanic that the cables would fit after telling him I got advice from ukpoc club members and showing him pictures from the Ford workshop manual.
He fitted the 3 cables and replacement calliper and bingo the problem is solved
Brought it in for 2nd retest and passed with flying colours, happy days
-
jrh
- Full Member
- Posts: 1022
- Joined: Thu Sep 20, 2018 3:08 pm
- Been thanked: 43 times
Post
by jrh » Sat Apr 27, 2019 10:14 am
Now that everything is working nicely , one fine warm dry day, take the rear wheels off and wrap some strips of DENSO tape round
the spindle of that lever ( between the caliper body and lever) which is attached to the brake cable.
Really mould it into the gap.
The ONLY problem with those rear calipers is caused by water droplets sitting in that gap, causing corrosion of the spindle, seal leaks even more,
spindle seizes in bore, brakes stay jammed on. End.
Who is online
Users browsing this forum: No registered users and 42 guests
