I have been advise that my head gaskets need replacing. Plus the bolts. I see that there are several options on the internet but has anyone purchased anything online and it has been successful? Need a full gasket set.
Probe 24v 1996.
Head Gaskets
-
Micron
- Site Admin
- Posts: 3442
- Joined: Thu Sep 06, 2018 6:08 pm
- Location: South Norfolk
- Has thanked: 62 times
- Been thanked: 91 times
Re: Head Gaskets
I purchased mine from RockAuto, when I believed that the head gasket was leaking, to be honest I don’t think it was!
Why do they say that it has “gone”
Why do they say that it has “gone”
Admin and Owner of this fine club 
Location : South Norfolk
Location : South Norfolk
Re: Head Gaskets
Hi
As far as I can gather it’s this.
If exhaust gases are present, the test fluid will “sniff” the gases as they are pulled through the fluid. If the blue fluid turns yellow or green, exhaust gases are leaking into the coolant system, and a head gasket repair is required. If fluid remains blue, exhaust gases are not present in the cooling system.
Thing is it’s not over heating. The oil looks fine not milky on dipstick, radiator cap dry, no white smoke from exhaust.
As far as I can gather it’s this.
If exhaust gases are present, the test fluid will “sniff” the gases as they are pulled through the fluid. If the blue fluid turns yellow or green, exhaust gases are leaking into the coolant system, and a head gasket repair is required. If fluid remains blue, exhaust gases are not present in the cooling system.
Thing is it’s not over heating. The oil looks fine not milky on dipstick, radiator cap dry, no white smoke from exhaust.
Re: Head Gaskets
Don’t know. Will find out.
At the moment the garage is sourcing a head gasket set and of course the bolts. These will have to probably come separate from the gasket set. Don’t know. Hopefully they are available.
At the moment the garage is sourcing a head gasket set and of course the bolts. These will have to probably come separate from the gasket set. Don’t know. Hopefully they are available.
-
Micron
- Site Admin
- Posts: 3442
- Joined: Thu Sep 06, 2018 6:08 pm
- Location: South Norfolk
- Has thanked: 62 times
- Been thanked: 91 times
Re: Head Gaskets
As I said, I got mine from RockAuto.
Admin and Owner of this fine club
Location : South Norfolk
Location : South Norfolk
Re: Head Gaskets
I’ve had a look on there. There are several bolts listed can you point m in the right direction to which ones fit? Do these parts come from the USA? I’ve also looked on Autodoc for the head gasket set plus the bolts. They seem to be available if pricey.
Again not sure which bolts are the right size. Is there a particular thread size etc.
Again not sure which bolts are the right size. Is there a particular thread size etc.
Who is online
Users browsing this forum: No registered users and 24 guests