High rpm idle, and bogging out
-
Jake
- Full Member
- Posts: 32
- Joined: Sun Aug 13, 2023 12:00 pm
- Has thanked: 2 times
- Been thanked: 1 time
High rpm idle, and bogging out
So ive replaced the tbps, but the problem is still there apparently i need to replace the idle control valve aswell but cant find any for sale, does anyone have a working full throttle body with the control valve, its really bugging me, i have messed about with the little idle screw but it doesnt bring the idle down enough
Re: High rpm idle, and bogging out
Double check that there are no little air/vac pipes left unconnected anywhere , especially the hidden one to the air intake
assembly.
assembly.
Re: High rpm idle, and bogging out
Sounds like coking up of the thermoststic throttle control valve if its a 16v.
Very, very carefully take it apart and clean it (in situ). Watch out for the spring.
It was a regular 2 - 3 year job on the Flying Machine.
Make sure your water level is correct and check that first.
Very, very carefully take it apart and clean it (in situ). Watch out for the spring.
It was a regular 2 - 3 year job on the Flying Machine.
Make sure your water level is correct and check that first.
-
Jake
- Full Member
- Posts: 32
- Joined: Sun Aug 13, 2023 12:00 pm
- Has thanked: 2 times
- Been thanked: 1 time
Re: High rpm idle, and bogging out
Okay thanks, was looking at taking it off the other day but it one of the screws is in a awkward place may have to take the throttle body off to get it off or something, how would you suggest getting it off?
Re: High rpm idle, and bogging out
I wouldnt. I was always able to take out the 4 screws holding the waxstat valve cover on with the body in situ. My memory is hazy as I havent don this in years but from memory engine coolant flows past a wax operated piston that in turn regulates the tickover air volume. This whole mechanism gets clogged with carbon that you need to get rid of with a solvent. (avoid the wax mech).
You havent said if you are 16v or 24v and the above only applies to the 16v. Disclaimer! Ive not fiddled with this mech for over ten years but beware parts poping out as you dismantle. Put a catchment sheet under the throttle body before you start. There is a light spring involved. 1 hour job.
You havent said if you are 16v or 24v and the above only applies to the 16v. Disclaimer! Ive not fiddled with this mech for over ten years but beware parts poping out as you dismantle. Put a catchment sheet under the throttle body before you start. There is a light spring involved. 1 hour job.
-
Jake
- Full Member
- Posts: 32
- Joined: Sun Aug 13, 2023 12:00 pm
- Has thanked: 2 times
- Been thanked: 1 time
Re: High rpm idle, and bogging out
Ahh okay thanks for that, yeh i have a 16v just got it last june as my first car ever, been working on cars my whole 19 years of life though with my dad, and thought this wiuld be great as a project (which i have now found out it isnt 
)
)-
Micron
- Site Admin
- Posts: 3336
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 61 times
- Been thanked: 89 times
Re: High rpm idle, and bogging out
Why do you think that it's not great as a project?
Admin and Owner of this fine club 
-
Jake
- Full Member
- Posts: 32
- Joined: Sun Aug 13, 2023 12:00 pm
- Has thanked: 2 times
- Been thanked: 1 time
Re: High rpm idle, and bogging out
Just things are more expensive than some other cars i were looking at, dont get me wrong i love the car, it grows more and more on me each day, my mates brother. In law has one, i remember seeing it fir the first time ever about 6 year ago and i fell in love ever since, just didnt realise how hard parts were to find, and the only place i can find some help is here (ukpoc) whereas some of the more common cars you can just look up on YouTube how to do something, but i do love the car
Who is online
Users browsing this forum: Majestic-12 [Bot] and 10 guests