Lights on dash - Abs and Airbag issue
-
- Full Member
- Posts: 73
- Joined: Fri Jan 13, 2023 7:35 pm
- Has thanked: 5 times
- Been thanked: 2 times
Re: Lights on dash - Abs and Airbag issue
While taking the rear trim off it dawned on me to multimeter test the abs sensor connectors. low and behold 1 rear is broken. Yet to get to the front pair and test but does anyone have ABS sensors for sale or can point me in the direction of any? Desperately in need as I can’t see any online.
Prior in this feed Andy kindly suggested a pair but unfortunately they don’t fit.
Prior in this feed Andy kindly suggested a pair but unfortunately they don’t fit.
-
- Site Admin
- Posts: 3334
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 61 times
- Been thanked: 89 times
Re: Lights on dash - Abs and Airbag issue
Why do the one’s that Andy has not fit if they came from a 97 Probe?
Can you post pictures of your current ones, including connectors
Can you post pictures of your current ones, including connectors
Admin and Owner of this fine club
-
- Full Member
- Posts: 73
- Joined: Fri Jan 13, 2023 7:35 pm
- Has thanked: 5 times
- Been thanked: 2 times
Re: Lights on dash - Abs and Airbag issue
The barrel of the sensor is slightly narrower than the ones on mine and would end up touching the ABS ring.
They look almost exactly like front sensors, however connectors are the same as the rear. I’ll add a photo but forgive that the ones removed from mine got mashed up.
Hard to explain but on mine the tip end of the sensor has a triangular shape to it whereas these were more rectangle.
Not sure which Mazda ones to buy on eBay, they look to be listed as rears but the images look like fronts with a rectangle profile. If someone can confirm a listing that fits I’m happy to buy and splice.
-
- Full Member
- Posts: 73
- Joined: Fri Jan 13, 2023 7:35 pm
- Has thanked: 5 times
- Been thanked: 2 times
Re: Lights on dash - Abs and Airbag issue
After playing around with multiple sensors I’ve finally got one together, fitted and working as it should. Big shout out thanks to Andy for supplying the bits
My dash is now light free, first MOT tomorrow so hopefully will be joining you all on the road
Thanks again for all the input
My dash is now light free, first MOT tomorrow so hopefully will be joining you all on the road
Thanks again for all the input
Who is online
Users browsing this forum: No registered users and 24 guests