Car idling high 16v
-
Jake
- Full Member
- Posts: 32
- Joined: Sun Aug 13, 2023 12:00 pm
- Has thanked: 2 times
- Been thanked: 1 time
Car idling high 16v
When i got the car it was missfiring, i replaced spark plugs,ht leads, injectors, and the distributor, im only young and didnt realise it would take the timing out to my luck my dad saved the day and told me about it (afterwards) so when i put it on right, the car ran nice but just too high in rpm, (around 2000) it has got a cone air filter on that i put on when i first got the car and im thinking it could be taking in to much air, help please any suggestions i have video of the sound if that will help anybody?
-
Kit
- Tech Rep
- Posts: 3551
- Joined: Fri Sep 07, 2018 8:16 pm
- Has thanked: 71 times
- Been thanked: 115 times
Re: Car idling high 16v
Throttle Position Sensor, it's on the side of you TB
Set your base idle
Check for vacuum lesks
Kit
-
Jake
- Full Member
- Posts: 32
- Joined: Sun Aug 13, 2023 12:00 pm
- Has thanked: 2 times
- Been thanked: 1 time
Re: Car idling high 16v
Update: i have been messing around with the distributor so that its idling better but its still too high, replaced the throttle body position sensor but that made no difference, i have an aftermarket cone air filter on could that been taking in too much air? Causing high idle?
Re: Car idling high 16v
First make sure the mechanical linkages are all working nicely and not sticking, anywhere.
Especially that tiny bearing that runs in the curved slot that is attached to the tps.
Along with other things , that adjustment screw will also affect idle speed.
llly that little
Especially that tiny bearing that runs in the curved slot that is attached to the tps.
Along with other things , that adjustment screw will also affect idle speed.
llly that little
Who is online
Users browsing this forum: No registered users and 15 guests