Update: callipers back together and handbrake all done with 4-5 clicks
thanks allRear calliper/handbrake rebuild
-
ryanandcharl
- Full Member
- Posts: 75
- Joined: Fri Jan 13, 2023 7:35 pm
- Has thanked: 6 times
- Been thanked: 2 times
Re: Rear calliper/handbrake rebuild
Ah the famous Denso tape, this wraps around the 4mm adjustment?
Update: callipers back together and handbrake all done with 4-5 clicks thanks all
Update: callipers back together and handbrake all done with 4-5 clicks
thanks allRe: Rear calliper/handbrake rebuild
The handbrake cable pulls a lever arm on the caliper.
That lever arm rotates a shaft which disappears into the caliper.
There is a lipseal on that shaft , which fails because of the high side loads from pulling the handbrake on.
YOU can help stop the water getting in , by packing the space between the arm and the caliper , with the magic tape.
That lever arm rotates a shaft which disappears into the caliper.
There is a lipseal on that shaft , which fails because of the high side loads from pulling the handbrake on.
YOU can help stop the water getting in , by packing the space between the arm and the caliper , with the magic tape.
Who is online
Users browsing this forum: No registered users and 84 guests