Front screen washer bottle

Post by **Tott61** » Tue Nov 07, 2023 2:51 pm

Ford Probe 1994 2.0

I have a leak from the screen washer bottle .
How do you remove it. I understand you have to remove the wheel arch splash shield but how is the bottle attached on and what connections are there
Thanks

Post by **cpt black** » Tue Nov 07, 2023 3:02 pm

Few bolts and a electrical connector under the wheel arch (wheel off just do the front section on the arch panel pull back )
if you want to unscrew from the top and take the whole unit out ;)You may find its just the grommet on the pump motor

Post by **Tott61** » Wed Nov 08, 2023 12:19 pm

Thanks for the help.
I peeled back the splash shield and the tube had become detached from the pump.
Having replaced it the low indicator light stays on. I read a previous post about removing and giving it a good clean as it has been untouched for 29 years.
There is a nut securing it at the top are there two at the bottom.

Thanks

Post by **cpt black** » Wed Nov 08, 2023 6:47 pm

put some soda cyrstals in the bottle with hot water and leave overnight

Post by **Micron** » Wed Nov 08, 2023 9:18 pm

cpt black wrote: ↑
Wed Nov 08, 2023 6:47 pm
put some soda cyrstals in the bottle with hot water and leave overnight

What do soda crystals do then Kev. And where do you get them?

Post by **cpt black** » Thu Nov 09, 2023 6:26 am

they can remove limescale etc have many uses and you can get from most food stores
in the washing isle

Post by **Micron** » Thu Nov 09, 2023 7:42 am

cpt black wrote: ↑
Thu Nov 09, 2023 6:26 am
they can remove limescale etc have many uses and you can get from most food stores
in the washing isle

Thanks

UKPOC forums

Front screen washer bottle

Front screen washer bottle

Re: Front screen washer bottle

Re: Front screen washer bottle

Re: Front screen washer bottle

Re: Front screen washer bottle

Re: Front screen washer bottle

Re: Front screen washer bottle

Who is online