For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
-
Incognito
- Full Member
- Posts: 2269
- Joined: Thu Sep 06, 2018 9:27 pm
- Has thanked: 48 times
- Been thanked: 18 times
Post
by Incognito » Tue Jun 29, 2021 5:19 pm
Any pointers please? On low speed manoeuvres, turning out of drive etc, I'm getting a loud , cracking /clunking noise from the nsf. Can't work out if its suspension or steering. Nothing untoward feeling wise , just a disturbing noise. Doesn't occur on normal road driving .
-
Kit
- Tech Rep
- Posts: 3551
- Joined: Fri Sep 07, 2018 8:16 pm
- Has thanked: 71 times
- Been thanked: 115 times
Post
by Kit » Tue Jun 29, 2021 5:23 pm
CV joint
Top strut bearing
Kit
-
Incognito
- Full Member
- Posts: 2269
- Joined: Thu Sep 06, 2018 9:27 pm
- Has thanked: 48 times
- Been thanked: 18 times
Post
by Incognito » Tue Jun 29, 2021 5:25 pm
Kit wrote: ↑Tue Jun 29, 2021 5:23 pm
CV joint
Top strut bearing
Kit
Doesn't sound like cv noise, but strut top bearing sounds a good place to start. Are these available easily?
-
Incognito
- Full Member
- Posts: 2269
- Joined: Thu Sep 06, 2018 9:27 pm
- Has thanked: 48 times
- Been thanked: 18 times
Post
by Incognito » Tue Jun 29, 2021 5:28 pm
I'm pretty sure I've had both cv joints replaced over the last 5 years .
-
Micron
- Site Admin
- Posts: 3334
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 61 times
- Been thanked: 89 times
Post
by Micron » Tue Jun 29, 2021 5:38 pm
You could try a bit of WD40 squirted on the top mount, just to see if it stops it for a while, at least you would then know what it is and what needs changing
Admin and Owner of this fine club
-
Incognito
- Full Member
- Posts: 2269
- Joined: Thu Sep 06, 2018 9:27 pm
- Has thanked: 48 times
- Been thanked: 18 times
Post
by Incognito » Tue Jun 29, 2021 6:16 pm
Micron wrote: ↑Tue Jun 29, 2021 5:38 pm
You could try a bit of WD40 squirted on the top mount, just to see if it stops it for a while, at least you would then know what it is and what needs changing
Cheers Trev, thick question , but do I do that from under the bonnet, or underneath , top of the strut mate ?
-
Micron
- Site Admin
- Posts: 3334
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 61 times
- Been thanked: 89 times
Post
by Micron » Tue Jun 29, 2021 6:26 pm
Incognito wrote: ↑Tue Jun 29, 2021 6:16 pm
Micron wrote: ↑Tue Jun 29, 2021 5:38 pm
You could try a bit of WD40 squirted on the top mount, just to see if it stops it for a while, at least you would then know what it is and what needs changing
Cheers Trev, thick question , but do I do that from under the bonnet, or underneath , top of the strut mate ?
I would try from under the bonnet, just put some in and around the top nut, it should work it's way down.
Admin and Owner of this fine club
-
jmx6
- Full Member
- Posts: 367
- Joined: Thu Sep 06, 2018 9:27 pm
- Been thanked: 8 times
Post
by jmx6 » Tue Jun 29, 2021 6:35 pm
Loose nut behind the wheel
-
Incognito
- Full Member
- Posts: 2269
- Joined: Thu Sep 06, 2018 9:27 pm
- Has thanked: 48 times
- Been thanked: 18 times
Post
by Incognito » Tue Jun 29, 2021 7:18 pm
jmx6 wrote: ↑Tue Jun 29, 2021 6:35 pm
Loose nut behind the wheel
Could easily be that mate
-
jrh
- Full Member
- Posts: 1022
- Joined: Thu Sep 20, 2018 3:08 pm
- Been thanked: 43 times
Post
by jrh » Tue Jun 29, 2021 7:23 pm
Broken spring ?
Who is online
Users browsing this forum: No registered users and 25 guests
