Keyless entry

Post by **Micron** » Mon Apr 26, 2021 1:32 pm

Andy, what year is your car?

Post by **Micron** » Mon Apr 26, 2021 1:43 pm

Andy kay93 wrote: ↑
Mon Apr 26, 2021 12:23 pm
Hi Trevor, yes I’ve got that bit working just the connection to lock and unlock central locking is required
Andy k

Ok, am I right in thinking then that you have power to the module?

Post by **Andy kay93** » Mon Apr 26, 2021 1:59 pm

Hi trever, yes I have power to module, and when I press
Lock and unlock on remote, I have power to white and white/ black because I’ve used the positive trigger wiring diagram,
I don’t know if this is the correct wiring diagram to use
And I don’t know where to connect white & white/ black if it is
Andy k

Post by **Micron** » Mon Apr 26, 2021 2:16 pm

Andy kay93 wrote: ↑
Mon Apr 26, 2021 1:59 pm
Hi trever, yes I have power to module, and when I press
Lock and unlock on remote, I have power to white and white/ black because I’ve used the positive trigger wiring diagram,
I don’t know if this is the correct wiring diagram to use
And I don’t know where to connect white & white/ black if it is
Andy k

Ok, I have nearly figured it out

Post by **Micron** » Mon Apr 26, 2021 3:41 pm

Andy,
here you go, hopefully it makes sense, if not give me a call

As mentioned you will need a 12v relay (standard car type) and a 4.7K Ohm resistor

Andy Kay Remote Locking Diagram.pdf: (89.42 KiB) Downloaded 745 times

UKPOC forums

Keyless entry

Re: Keyless entry

Re: Keyless entry

Re: Keyless entry

Re: Keyless entry

Re: Keyless entry

Who is online