Keyless entry

Post by **Andy kay93** » Sun Apr 25, 2021 7:12 pm

Hi all, so bought a cheap Chinese keyless entry kit from
eBay, and got the probe in pieces trying to fit it, I believe
I need to fit a resistor somewhere, does any body know
How to fit these as I haven’t got a clue, at the moment I have
A white and a white/black wire from the keyless system
And I’ve not got a clue where to fit them
Hope you can help

Andy k

Post by **Kit** » Sun Apr 25, 2021 7:51 pm

viewtopic.php?f=32&t=473

Have a look here

Kit

Post by **Kit** » Sun Apr 25, 2021 7:54 pm

UKPOC admin, might be able to help

Kit

Post by **Micron** » Sun Apr 25, 2021 7:57 pm

Hi Andy,
Send me your wiring diagram and I will work out which wires go where.
Trev

Post by **Andy kay93** » Sun Apr 25, 2021 8:24 pm

Hi Trevor,
Sending pictures, thank you

Post by **Andy kay93** » Sun Apr 25, 2021 8:44 pm

Hi Trevor, also found this posted by scooby
But it doesn’t show where white, white/black wires go

Post by **Micron** » Sun Apr 25, 2021 9:18 pm

I will take a look tomorrow

Post by **Andy kay93** » Sun Apr 25, 2021 9:27 pm

Great thanks Trevor,

Post by **Micron** » Mon Apr 26, 2021 10:33 am

Andy,

Do you think that you will want to flash the indicators when you fit the remote locking module?

Post by **Andy kay93** » Mon Apr 26, 2021 12:23 pm

Hi Trevor, yes I’ve got that bit working just the connection to lock and unlock central locking is required
Andy k

UKPOC forums

Keyless entry

Keyless entry

Re: Keyless entry

Re: Keyless entry

Re: Keyless entry

Re: Keyless entry

Re: Keyless entry

Re: Keyless entry

Re: Keyless entry

Re: Keyless entry

Re: Keyless entry

Who is online