24V Ignition Timing

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
Boysen IV
Full Member
Posts: 62
Joined: Tue Nov 13, 2018 1:59 pm
Has thanked: 2 times

24V Ignition Timing

Post by Boysen IV » Thu Jul 30, 2020 5:30 pm

Hello everyone,

I would like to check the ignition timing on my car. I've read the "Fine Tuning" article in the Oracle and that says it should be 10˚ before TDC. From memory of doing this (or rather, having it done for me) over 10 years ago (!) I think that the engine has to be running at 1500 rpm. Is that correct?

The other question is where do I connect the trigger for the probe light?

The article then goes on to suggest other things, which I will add to the list.

Thanks,

Peter
Top
Micron
Site Admin
Posts: 3334
Joined: Thu Sep 06, 2018 6:08 pm
Has thanked: 61 times
Been thanked: 89 times

Re: 24V Ignition Timing

Post by Micron » Thu Jul 30, 2020 7:42 pm

Peter, I have moved this to the garage.
Admin and Owner of this fine club 😎
Top
Boysen IV
Full Member
Posts: 62
Joined: Tue Nov 13, 2018 1:59 pm
Has thanked: 2 times

Re: 24V Ignition Timing

Post by Boysen IV » Fri Jul 31, 2020 8:18 pm

Whoops, sorry.

That's where I thought I was putting it :roll:
Top
Post Reply

Return to “The Garage - Technical Forum”

Who is online

Users browsing this forum: Google [Bot] and 41 guests