For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
-
Scooby
- Registered User
- Posts: 488
- Joined: Fri Sep 21, 2018 11:49 am
- Has thanked: 4 times
- Been thanked: 3 times
Post
by Scooby » Thu Apr 23, 2020 9:55 pm
Evening all.
My Diamond White project car has a single wiper mod fitted and I'm looking to return it to a standard set-up.
Does anyone have the single wiper mod instructions so I can reverse engineer it into removal instructions?
I have a complete wiper set-up on my breaker so I've got all the parts, just want to make sure I don't miss anything.
Member no: 227
Location: Banks, Nr Preston, Lancs.
Drives: 2x 24V - Japha and Chewie
-
Mada
- Registered User
- Posts: 81
- Joined: Fri Apr 12, 2019 10:43 pm
Post
by Mada » Fri Apr 24, 2020 7:23 am
I'll be interested in the single wiper once it's removed!
Have you got any pictures of it?
-
Scooby
- Registered User
- Posts: 488
- Joined: Fri Sep 21, 2018 11:49 am
- Has thanked: 4 times
- Been thanked: 3 times
Post
by Scooby » Fri Apr 24, 2020 8:14 am
Mada wrote: ↑Fri Apr 24, 2020 7:23 am
I'll be interested in the single wiper once it's removed!
Have you got any pictures of it?
Nothing close-up I'm afraid other than this one with it in the background. I'll take some today if I get chance.
The wiper blade is trashed, but the rest of it seems OK.
Member no: 227
Location: Banks, Nr Preston, Lancs.
Drives: 2x 24V - Japha and Chewie
-
cpt black
- Tech Rep
- Posts: 2835
- Joined: Fri Sep 07, 2018 8:28 am
- Location: chatham/kent
- Has thanked: 15 times
- Been thanked: 88 times
Post
by cpt black » Fri Apr 24, 2020 9:31 am
If I remember Kev you had to cut the arm on the motor part and weld 10mm in to it
to mod it
Last edited by
cpt black on Sat Apr 25, 2020 9:00 am, edited 1 time in total.
-
Micron
- Site Admin
- Posts: 3358
- Joined: Thu Sep 06, 2018 6:08 pm
- Location: South Norfolk
- Has thanked: 61 times
- Been thanked: 90 times
Post
by Micron » Fri Apr 24, 2020 9:34 am
It's not as hard as it sounds, all the mod is, is an extended arm off the actual motor, just replace that with an original one for dual or a modded one for single. What normally happens is someone cuts an arm in half and welds a bit in. the arm in question is under the scuttle panel.
Unless you want to be lazy and just change the wording on what was previously written
Admin and Owner of this fine club
Location : South Norfolk
-
Jon G 24V
- Tech Rep
- Posts: 659
- Joined: Fri Sep 07, 2018 8:05 pm
- Has thanked: 1 time
- Been thanked: 7 times
Post
by Jon G 24V » Fri Apr 24, 2020 11:28 am
Mada wrote: ↑Fri Apr 24, 2020 7:23 am
I'll be interested in the single wiper once it's removed!
Have you got any pictures of it?
Single Wiper Mod looks cool, Kaz's Car has one but believe me they are useless in heavy rain.
Wipers end up on full speed and you still can't see a thing
Not taken it off though, she just drives it in Dry weather
-
Scooby
- Registered User
- Posts: 488
- Joined: Fri Sep 21, 2018 11:49 am
- Has thanked: 4 times
- Been thanked: 3 times
Post
by Scooby » Sat Apr 25, 2020 8:27 am
Cheers guys.
I wasn't sure if there was any wiring alterations as well. This one seems to do a sweep every time the ignition is turned on!
Member no: 227
Location: Banks, Nr Preston, Lancs.
Drives: 2x 24V - Japha and Chewie
-
Slick
- Full Member
- Posts: 884
- Joined: Fri Sep 07, 2018 4:07 pm
- Been thanked: 12 times
Post
by Slick » Tue Apr 28, 2020 6:13 am
cpt black wrote: ↑Fri Apr 24, 2020 9:31 am
If I remember Kev you had to cut the arm on the motor part and weld 10mm in to it
to mod it
Yep, that's it, Bally used to do them, think I have a couple knocking about in the shed somewhere.....
Who is online
Users browsing this forum: No registered users and 33 guests
