Alternator bottom bolt
-
- Full Member
- Posts: 137
- Joined: Wed Dec 29, 2021 8:13 pm
- Been thanked: 1 time
Alternator bottom bolt
Hi all have a problem getting bottom pivot bolt on alternator out not enough clearance,what’s the easiest way to get it out
-
- Full Member
- Posts: 137
- Joined: Wed Dec 29, 2021 8:13 pm
- Been thanked: 1 time
-
- Moderator
- Posts: 629
- Joined: Fri Nov 22, 2019 12:26 pm
- Has thanked: 7 times
- Been thanked: 18 times
Re: Alternator bottom bolt
I have no experience of this but ...
Once you have the lower bolt loosened so that it slides freely, just pivot the alternator down and remove it. You do not need to completely remove the bolt.
https://www.fordforums.com/threads/94-p ... or.141908/
Once you have the lower bolt loosened so that it slides freely, just pivot the alternator down and remove it. You do not need to completely remove the bolt.
https://www.fordforums.com/threads/94-p ... or.141908/
Re: Alternator bottom bolt
Just removed alternator myself I found I had to drop the a/c pump out of way just be careful of pipes, remove the top mounting bracket from engine for extra clearance lossen the bottom alternator bolt the one that can’t be removed as it hits the frame but it doesn’t need completely removing, then pivot the alternator out from the bottom the mounting point, the bolt guide has a slit Down the length allowing removal, sorry for bad description but didn’t think of taking pictures as I was doing job and spent better part of a day working it out, hope this helps
-
- Full Member
- Posts: 137
- Joined: Wed Dec 29, 2021 8:13 pm
- Been thanked: 1 time
Re: Alternator bottom bolt
Thanks everyone for your help will give it a go tomorrow,started to get cold now me and the Cold weather don’t get on with working outside
-
- Full Member
- Posts: 137
- Joined: Wed Dec 29, 2021 8:13 pm
- Been thanked: 1 time
Re: Alternator bottom bolt
Thanks to everyone for the help on how to remove the alternator and pivot bolt,replaced alternator for a new one works a treat,happy days.
Who is online
Users browsing this forum: Bing [Bot], Google [Bot] and 30 guests