Keyless entry
-
- Site Admin
- Posts: 3358
- Joined: Thu Sep 06, 2018 6:08 pm
- Location: South Norfolk
- Has thanked: 61 times
- Been thanked: 90 times
Re: Keyless entry
Ok, am I right in thinking then that you have power to the module?Andy kay93 wrote: ↑Mon Apr 26, 2021 12:23 pmHi Trevor, yes I’ve got that bit working just the connection to lock and unlock central locking is required
Andy k
Admin and Owner of this fine club
Location : South Norfolk
Location : South Norfolk
-
- Full Member
- Posts: 239
- Joined: Sun Apr 14, 2019 3:19 pm
Re: Keyless entry
Hi trever, yes I have power to module, and when I press
Lock and unlock on remote, I have power to white and white/ black because I’ve used the positive trigger wiring diagram,
I don’t know if this is the correct wiring diagram to use
And I don’t know where to connect white & white/ black if it is
Andy k
Lock and unlock on remote, I have power to white and white/ black because I’ve used the positive trigger wiring diagram,
I don’t know if this is the correct wiring diagram to use
And I don’t know where to connect white & white/ black if it is
Andy k
-
- Site Admin
- Posts: 3358
- Joined: Thu Sep 06, 2018 6:08 pm
- Location: South Norfolk
- Has thanked: 61 times
- Been thanked: 90 times
Re: Keyless entry
Ok, I have nearly figured it outAndy kay93 wrote: ↑Mon Apr 26, 2021 1:59 pmHi trever, yes I have power to module, and when I press
Lock and unlock on remote, I have power to white and white/ black because I’ve used the positive trigger wiring diagram,
I don’t know if this is the correct wiring diagram to use
And I don’t know where to connect white & white/ black if it is
Andy k
Admin and Owner of this fine club
Location : South Norfolk
Location : South Norfolk
-
- Site Admin
- Posts: 3358
- Joined: Thu Sep 06, 2018 6:08 pm
- Location: South Norfolk
- Has thanked: 61 times
- Been thanked: 90 times
Re: Keyless entry
Andy,
here you go, hopefully it makes sense, if not give me a call
As mentioned you will need a 12v relay (standard car type) and a 4.7K Ohm resistor
here you go, hopefully it makes sense, if not give me a call
As mentioned you will need a 12v relay (standard car type) and a 4.7K Ohm resistor
Admin and Owner of this fine club
Location : South Norfolk
Location : South Norfolk
Who is online
Users browsing this forum: No registered users and 33 guests