Keyless entry

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Micron
Site Admin
Posts: 3332
Joined: Thu Sep 06, 2018 6:08 pm
Has thanked: 61 times
Been thanked: 89 times

Re: Keyless entry

Post by Micron » Mon Apr 26, 2021 1:32 pm

Andy, what year is your car?
Admin and Owner of this fine club 😎

Micron
Site Admin
Posts: 3332
Joined: Thu Sep 06, 2018 6:08 pm
Has thanked: 61 times
Been thanked: 89 times

Re: Keyless entry

Post by Micron » Mon Apr 26, 2021 1:43 pm

Andy kay93 wrote:
Mon Apr 26, 2021 12:23 pm
Hi Trevor, yes I’ve got that bit working just the connection to lock and unlock central locking is required
Andy k
Ok, am I right in thinking then that you have power to the module?
Admin and Owner of this fine club 😎

Andy kay93
Full Member
Posts: 239
Joined: Sun Apr 14, 2019 3:19 pm

Re: Keyless entry

Post by Andy kay93 » Mon Apr 26, 2021 1:59 pm

Hi trever, yes I have power to module, and when I press
Lock and unlock on remote, I have power to white and white/ black because I’ve used the positive trigger wiring diagram,
I don’t know if this is the correct wiring diagram to use
And I don’t know where to connect white & white/ black if it is
Andy k

Micron
Site Admin
Posts: 3332
Joined: Thu Sep 06, 2018 6:08 pm
Has thanked: 61 times
Been thanked: 89 times

Re: Keyless entry

Post by Micron » Mon Apr 26, 2021 2:16 pm

Andy kay93 wrote:
Mon Apr 26, 2021 1:59 pm
Hi trever, yes I have power to module, and when I press
Lock and unlock on remote, I have power to white and white/ black because I’ve used the positive trigger wiring diagram,
I don’t know if this is the correct wiring diagram to use
And I don’t know where to connect white & white/ black if it is
Andy k
Ok, I have nearly figured it out
Admin and Owner of this fine club 😎

Micron
Site Admin
Posts: 3332
Joined: Thu Sep 06, 2018 6:08 pm
Has thanked: 61 times
Been thanked: 89 times

Re: Keyless entry

Post by Micron » Mon Apr 26, 2021 3:41 pm

Andy,
here you go, hopefully it makes sense, if not give me a call

As mentioned you will need a 12v relay (standard car type) and a 4.7K Ohm resistor
Andy Kay Remote Locking Diagram.pdf
(89.42 KiB) Downloaded 742 times
Admin and Owner of this fine club 😎

Post Reply

Who is online

Users browsing this forum: No registered users and 15 guests