2.0 16v petrol
Blue
So the car didn’t come with the lights and although to have a pair and centre piece, I don’t have the fixings. Rather than guess, could someone point out what screws/plugs/fixtures i need for the photos below. Tia
Clips and bits for back lights
-
ryanandcharl
- Full Member
- Posts: 83
- Joined: Fri Jan 13, 2023 7:35 pm
- Has thanked: 7 times
- Been thanked: 2 times
Clips and bits for back lights
1995 Ford probe
2.0 16v petrol
Blue
So the car didn’t come with the lights and although to have a pair and centre piece, I don’t have the fixings. Rather than guess, could someone point out what screws/plugs/fixtures i need for the photos below. Tia
2.0 16v petrol
Blue
So the car didn’t come with the lights and although to have a pair and centre piece, I don’t have the fixings. Rather than guess, could someone point out what screws/plugs/fixtures i need for the photos below. Tia
-
Kit
- Tech Rep
- Posts: 3559
- Joined: Fri Sep 07, 2018 8:16 pm
- Location: Vange, Basildon
- Has thanked: 71 times
- Been thanked: 115 times
Re: Clips and bits for back lights
Back of the center panel often break, or rust out, normally I would set in place with a mastic dab,
With the lights it just suit able sized round head self tapper screw
Kit
-
andy p
- Full Member
- Posts: 300
- Joined: Thu Oct 28, 2021 10:49 am
- Has thanked: 1 time
- Been thanked: 9 times
Re: Clips and bits for back lights
These are the bits you need,
This is top fixing, Black plug and screw, below right
Below left, white clips go in the body Black clips go on the light before installation
The centre reflector is held on with screws inside the boot Which normally go rusty.
I hope this helps.
Andy
This is top fixing, Black plug and screw, below right
Below left, white clips go in the body Black clips go on the light before installation
The centre reflector is held on with screws inside the boot Which normally go rusty.
I hope this helps.
Andy
Who is online
Users browsing this forum: No registered users and 36 guests