Note to all

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
cpt black
Tech Rep
Posts: 661
Joined: Fri Sep 07, 2018 8:28 am
Has thanked: 1 time
Been thanked: 10 times

Note to all

Post by cpt black » Thu Sep 12, 2019 4:29 pm

When you do the front wishbones,because your outer strut bush to strut is Knackered
Leave the 2 bolts that hold the wish bone in place leave well alone just undo the the nut
and pull the the wish bone off the bush/bearing as will save grief when you Knacker the
Thread/bolt

jmx6
Full Member
Posts: 104
Joined: Thu Sep 06, 2018 9:27 pm
Been thanked: 2 times

Re: Note to all

Post by jmx6 » Thu Sep 12, 2019 7:26 pm

This sounds like a hard learned lesson. I hope all is well again on the car.

Jon G 24V
Tech Rep
Posts: 380
Joined: Fri Sep 07, 2018 8:05 pm
Been thanked: 4 times

Re: Note to all

Post by Jon G 24V » Thu Sep 19, 2019 7:37 pm

Good advice, been there and stripped the threads :lol:

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests