Holes in my sills both sides at rear
-
- Full Member
- Posts: 239
- Joined: Sun Apr 14, 2019 3:19 pm
Holes in my sills both sides at rear
Hi
Anybody had this? What sort of job is it to repair,
Could inner sills be corroded? What’s best way of checking
Sorry about all questions
Andy
Anybody had this? What sort of job is it to repair,
Could inner sills be corroded? What’s best way of checking
Sorry about all questions
Andy
Re: Holes in my sills both sides at rear
common issue,
difficult to say, depends on the extent of rust.
any pictures.....
can only check the inners once you have cut out the rust on the outer....
most repairs are doable all depends on how deep your pockets and the overall condition of the rest of the car.
But both inner and out has been replaced before, a lot of work...
all the best
difficult to say, depends on the extent of rust.
any pictures.....
can only check the inners once you have cut out the rust on the outer....
most repairs are doable all depends on how deep your pockets and the overall condition of the rest of the car.
But both inner and out has been replaced before, a lot of work...
all the best
-
- Full Member
- Posts: 239
- Joined: Sun Apr 14, 2019 3:19 pm
-
- Full Member
- Posts: 239
- Joined: Sun Apr 14, 2019 3:19 pm
-
- Full Member
- Posts: 239
- Joined: Sun Apr 14, 2019 3:19 pm
Re: Holes in my sills both sides at rear
Wow! That looks bad, managed to patch mine, ok for
As long as mr Mot is happy, but going forward I would
Replace sills, if only I could get some
As long as mr Mot is happy, but going forward I would
Replace sills, if only I could get some
-
- Full Member
- Posts: 239
- Joined: Sun Apr 14, 2019 3:19 pm
Re: Holes in my sills both sides at rear
That’s look great!, what sort of price do you think I’d
Be looking at for both sides?
Be looking at for both sides?
- Andy W
- Full Member
- Posts: 503
- Joined: Thu Sep 06, 2018 11:49 pm
- Has thanked: 1 time
- Been thanked: 2 times
Re: Holes in my sills both sides at rear
I think it was around £60 from Kev for inners and outers when I did mine a couple of years ago.Andy kay93 wrote: ↑Thu Jul 25, 2019 7:49 pmThat’s look great!, what sort of price do you think I’d
Be looking at for both sides?
Best ask Kev (CPT black) as it depends if he is still able to make them.
Who is online
Users browsing this forum: No registered users and 46 guests