As the title suggests.............
Lower front wishbone bolts and nut... required
Had to cut mine off when replacing the wishbones,
so any one know the replacement bolt and nut size....
or a link to buying one......
Many thanks,
need it for the MOT
wanted lower front wishbone bolt
Re: wanted lower front wishbone bolt
Thanks Duncan,
I am sure i have one in my spares somewhere also......but just needed the info.
i can source locally as i need it quickly for the MOT next week.
and i am sure it will fail without one.... lol lol
many thanks for the offer.
Thanks for the info.
See you soon.
I am sure i have one in my spares somewhere also......but just needed the info.
i can source locally as i need it quickly for the MOT next week.
and i am sure it will fail without one.... lol lol
many thanks for the offer.
Thanks for the info.
See you soon.
Re: wanted lower front wishbone bolt
that sounds like the lower ball joint to the hub.....
i was after the long one at the front of the wishbone
nut is held by a welded cage,
and thats where the dirt gets stuck and it rusts it all up......
bolt feeds from the front.....
looks like about 100mm long from under the bolt head to the end.
Maybe an M12???
please can anyone clarify.
thank you
-
- Site Admin
- Posts: 3234
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 56 times
- Been thanked: 87 times
Re: wanted lower front wishbone bolt
Wayne,
Do you need the nut as well?
as a last resort, could you remove the other one and use it as a guide, then go to a local ironmongers to get a replacement bolt etc?
Do you need the nut as well?
as a last resort, could you remove the other one and use it as a guide, then go to a local ironmongers to get a replacement bolt etc?
Admin and Owner of this fine club
Who is online
Users browsing this forum: Bing [Bot] and 26 guests