You've got me racking my brains now for the checks I did and I'm pretty sure I too had no fuel even though the trip was set and I changed the pump relay, so my recollection was that I similarly had no signal to pump fuel from the ecu and that sort of makes sense if you know (ecu) that you're noy going to allow the car to start.
For sure the pump wasnt running or at least, I could not hear it doing so but all came good on its own with the new CPS lead. Cant remember what was happening with the key light so I'm no help to you there.
No start
-
cpt black
- Tech Rep
- Posts: 2815
- Joined: Fri Sep 07, 2018 8:28 am
- Has thanked: 15 times
- Been thanked: 88 times
Re: No start
Cheers for that Bob had a similar issue many years ago probe wood not start got a new key and was fine
But cant remember if cel was on constant before new key (its a age thing)
But cant remember if cel was on constant before new key (its a age thing)
-
cpt black
- Tech Rep
- Posts: 2815
- Joined: Fri Sep 07, 2018 8:28 am
- Has thanked: 15 times
- Been thanked: 88 times
Re: No start
Temic system will start briefly for 50 seconds and cut out if cps faulty but wont start after that but
just crank as fuel is cut off,dead key will just crank over and over i believe as fuel pump wont run
will check for rodent damage,just a shame as got 2 none runners now 1 fuel pump needs doing and
now this one :lol
Had one at work cranked all the time you got me a Temic key and fired up straight away so will
i be lucky again
just crank as fuel is cut off,dead key will just crank over and over i believe as fuel pump wont run
will check for rodent damage,just a shame as got 2 none runners now 1 fuel pump needs doing and
now this one :lol
Had one at work cranked all the time you got me a Temic key and fired up straight away so will
i be lucky again
Re: No start
Cant help over the key issue but I can say that mine is a Temic reg 1997 and it very definitely would not start with a faulty CPS. It will run on the TDC signal from the dizzy without the CPS but needs the CPS when starting to identify the position of the crank and I presume, to tell the ECU that the engine is rotating. Worth checking the info I uploaded a while ago on fault codes for a more authoratative explanation of this fault but my experience was No CPS - No start! Furthermore we know that to be the case from the connector issue.
Re: No start
You'll sort it Kev - never in doubt.
Thinking about it, I suppose if the fault was with the Dizzy TDC, you might get a different result. The ECU might allow a start courtesy of the CPS, but then shut the engine down when not detecting the TDC pulse from the Dizzy! Might be nonsense, but its just a thought! I have it in the back of my mind that I had a fault like that in the dim, distant past, that was resolved with a Used But Good Dizzy. (Thank you, Malcolm!)
-
cpt black
- Tech Rep
- Posts: 2815
- Joined: Fri Sep 07, 2018 8:28 am
- Has thanked: 15 times
- Been thanked: 88 times
Re: No start
Well new key made no difference still have cel light on and abs light both constant cranks over fine
so time to check for spark cant smell any fuel and checked fuel rail its dry so something inhibiting from running
no codes showing on dash or with diode just constant
still have cel light on and abs light both constant cranks over fineso time to check for spark cant smell any fuel and checked fuel rail its dry so something inhibiting from running
no codes showing on dash or with diode just constant
Who is online
Users browsing this forum: No registered users and 30 guests