For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
-
KEG
- Registered User
- Posts: 71
- Joined: Thu Aug 29, 2019 3:38 pm
- Has thanked: 4 times
Post
by KEG » Wed Mar 25, 2020 2:42 pm
Probe failed it’s mot today. Both suspension mounts corroded. Anyone know where there can be obtained?
Probe is 1996, 24V.
-
Kit
- Tech Rep
- Posts: 3423
- Joined: Fri Sep 07, 2018 8:16 pm
- Has thanked: 67 times
- Been thanked: 106 times
Post
by Kit » Wed Mar 25, 2020 2:49 pm
Need a bit more detail, please
Photos etc
Kit
-
KEG
- Registered User
- Posts: 71
- Joined: Thu Aug 29, 2019 3:38 pm
- Has thanked: 4 times
Post
by KEG » Wed Mar 25, 2020 2:50 pm
That’s all I know. Garage informed me.
-
KEG
- Registered User
- Posts: 71
- Joined: Thu Aug 29, 2019 3:38 pm
- Has thanked: 4 times
Post
by KEG » Wed Mar 25, 2020 3:53 pm
Front both sides.
-
Micron
- Site Admin
- Posts: 3208
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 53 times
- Been thanked: 86 times
Post
by Micron » Wed Mar 25, 2020 4:06 pm
Duncan is right, pictures will help so much. I believe that it's unusual for the near side to fail, but I guess not impossible?
Admin and Owner of this fine club
-
KEG
- Registered User
- Posts: 71
- Joined: Thu Aug 29, 2019 3:38 pm
- Has thanked: 4 times
Post
by KEG » Wed Mar 25, 2020 4:33 pm
Why will photos help?
-
jrh
- Full Member
- Posts: 969
- Joined: Thu Sep 20, 2018 3:08 pm
- Been thanked: 39 times
Post
by jrh » Wed Mar 25, 2020 6:41 pm
It is almost certain you are referring to the bodywork ( or lack of it ) to which the mounts are attached.
A bodywork welding job .
-
Micron
- Site Admin
- Posts: 3208
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 53 times
- Been thanked: 86 times
Post
by Micron » Wed Mar 25, 2020 6:48 pm
KEG wrote: ↑Wed Mar 25, 2020 4:33 pm
Why will photos help?
Because as they say, a picture paints a thousand words, and they will give us a better understanding of the problem.
Admin and Owner of this fine club
-
KEG
- Registered User
- Posts: 71
- Joined: Thu Aug 29, 2019 3:38 pm
- Has thanked: 4 times
Post
by KEG » Wed Mar 25, 2020 8:58 pm
All I know is that the garage is trying to source replacements and nothing was said about any welding etc.
Who is online
Users browsing this forum: No registered users and 48 guests