as jammed down the bore,so could be the spring in the piston weak no
fluid loss,and no fluid to slave cylinder so will remove the rod and use a
screwdriver as the rod and try to bleed that way
Another clutch failure
-
cpt black
- Tech Rep
- Posts: 2866
- Joined: Fri Sep 07, 2018 8:28 am
- Location: chatham/kent
- Has thanked: 15 times
- Been thanked: 88 times
Another clutch failure
Suspect master cylinder as push rod not contacting with the piston
as jammed down the bore,so could be the spring in the piston weak no
fluid loss,and no fluid to slave cylinder so will remove the rod and use a
screwdriver as the rod and try to bleed that way
as jammed down the bore,so could be the spring in the piston weak no
fluid loss,and no fluid to slave cylinder so will remove the rod and use a
screwdriver as the rod and try to bleed that way
Who is online
Users browsing this forum: No registered users and 21 guests