Suspension Bolts
-
CharlesUK
- Full Member
- Posts: 105
- Joined: Mon Feb 14, 2022 10:55 am
- Location: Yeovil, Somerset
- Has thanked: 1 time
- Been thanked: 3 times
Suspension Bolts
Where do I find replacement suspension bolts?! Ford and Mazda don't stock the strut-to-knuckle pinch bolt or the rear lateral arm bolt. Both have stripped/snapped and looking like I might have to use a fully threaded bolt from local fastener
-
CharlesUK
- Full Member
- Posts: 105
- Joined: Mon Feb 14, 2022 10:55 am
- Location: Yeovil, Somerset
- Has thanked: 1 time
- Been thanked: 3 times
Re: Suspension Bolts
Where and how can I get one made? I can get a hold of the other strut pinch bolt, but don't want to even try and remove the other lateral arm bolt in fear of that snapping as well 
Re: Suspension Bolts
You need , the best penetrating oil you can afford , time , patience , hammer , good punch , spanners.
Give the oil plenty of time , overnight , to soak in , then bash away , more oil , etc.
Small movements , back and forth , it will go , eventually.
There will be a nut/bolt stockist somewhere , phone them.
Or a small machine shop, explain , they will make one.
And yes , DENSO tape in all those joins/gaps to prevent it happening again.
Give the oil plenty of time , overnight , to soak in , then bash away , more oil , etc.
Small movements , back and forth , it will go , eventually.
There will be a nut/bolt stockist somewhere , phone them.
Or a small machine shop, explain , they will make one.
And yes , DENSO tape in all those joins/gaps to prevent it happening again.
Who is online
Users browsing this forum: No registered users and 39 guests