Heater
Heater
Hi, got a bit of a problem with the heater, it works on all speeds but no matter what position it’s set on, it only blows out the vents towards your face, all the buttons light up when individually pressed but won’t direct it to the screen, feet etc. Any idea what it could be? It’s a 2.0 no air con. Thanks
-
Micron
- Site Admin
- Posts: 3335
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 61 times
- Been thanked: 89 times
Re: Heater
I would say it's one of the following things, either the controller is faulty, the blower isn't moving to the other position on the heater, the cable to either is faulty, or the pipe from the blower to the screen has become disconnected
All of which are a pain the arse to get to (within reason)
All of which are a pain the arse to get to (within reason)
Admin and Owner of this fine club 
-
cpt black
- Tech Rep
- Posts: 2823
- Joined: Fri Sep 07, 2018 8:28 am
- Has thanked: 15 times
- Been thanked: 88 times
Re: Heater
you could try a new heater control module take front consul out to test(refit new one) test
then side panels with whole consul to see blower unit and see wot it does if the
actuators move
then side panels with whole consul to see blower unit and see wot it does if the
actuators move
Who is online
Users browsing this forum: No registered users and 31 guests