I thought they were both different ones
Driveshafts....
Driveshafts....
Is it right one side fits both 16 & 24, and the other is different??
I thought they were both different ones
I thought they were both different ones
-
mojo98
- Tech Rep
- Posts: 2630
- Joined: Thu Sep 06, 2018 10:52 pm
- Has thanked: 41 times
- Been thanked: 55 times
Re: Driveshafts....
well J&R are selling ones for off side and near side, saying it 2.0 & 2.5
I ordered 2 pair (4) and I used one (off side on a 2.5) and one on the near side on the 2.0
does that help, I did believe that there was a difference but used mine on both cars
I ordered 2 pair (4) and I used one (off side on a 2.5) and one on the near side on the 2.0
does that help, I did believe that there was a difference but used mine on both cars
-
Kit
- Tech Rep
- Posts: 3552
- Joined: Fri Sep 07, 2018 8:16 pm
- Has thanked: 71 times
- Been thanked: 115 times
Re: Driveshafts....
The 16v shaft&inner CV joint is smaller on diameter, than a 24v.
If you use a 24v O/s drive shaft on a 16v, can’t get at the bolts on the intermediate shaft bearing, to the block
Kit
If you use a 24v O/s drive shaft on a 16v, can’t get at the bolts on the intermediate shaft bearing, to the block
Kit
Re: Driveshafts....
That’s why I’m checking! See that j&r are listing one that fits both supposedly and thought it might be wrong.
Think I’m needing for the 16v
Think I’m needing for the 16v
Who is online
Users browsing this forum: No registered users and 77 guests