Front control arm bolts

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
MikeyG
Full Member
Posts: 93
Joined: Thu Nov 29, 2018 6:01 pm
Has thanked: 1 time

Front control arm bolts

Post by MikeyG » Sat Dec 04, 2021 7:15 pm

Hey,

1995 2.0l

Taking off the front control arms and there's a nut that's impossible to get - I've used the gun on the bolt side to break it loose, but it's just spinning now as I can't hold the nut. See picture for reference.
Image

Any ideas welcome.

Thanks,
Top
Kit
Tech Rep
Posts: 3551
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 71 times
Been thanked: 115 times

Re: Front control arm bolts

Post by Kit » Sat Dec 04, 2021 8:49 pm

Cut the head of the bolt of, & drive it through the bush.


Kit
Top
Kit
Tech Rep
Posts: 3551
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 71 times
Been thanked: 115 times

Re: Front control arm bolts

Post by Kit » Sat Dec 04, 2021 8:52 pm

Or chisel of the ‘captive’ lips the hold the nut, then try & get a spanner on it :idea:

Lots of WD-40 the day before helps

Kit
Top
mojo98
Tech Rep
Posts: 2627
Joined: Thu Sep 06, 2018 10:52 pm
Has thanked: 41 times
Been thanked: 55 times

Re: Front control arm bolts

Post by mojo98 » Sat Dec 04, 2021 9:11 pm

In the past the same thing happened to me, I got a friend to weld the nut in position then removed the bolt,
and on another time I managed to grind down the sides of a spanner to get right in, and used plenty of wd40

Good luck
Top
Post Reply

Return to “The Garage - Technical Forum”

Who is online

Users browsing this forum: No registered users and 23 guests