Exhaust done

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Dakota
Full Member
Posts: 108
Joined: Sat Aug 08, 2020 7:50 pm

Exhaust done

Post by Dakota » Wed Sep 09, 2020 6:26 pm

Well 6 hours on my back , bust nails stinking to high hell but it was worth it . Just about to test drive , decat and the rest of the exhaust system done .cut off old one u bought a big bar but couldn't get it high enough to use but worth the investment .got a lovely rasp to it and I can smell the petrol instead of a stinky cat so a result . Thanks guys for the advice .
Dakota
Image
Image

Image

Image

Micron
Site Admin
Posts: 1091
Joined: Thu Sep 06, 2018 6:08 pm
Been thanked: 9 times

Re: Exhaust done

Post by Micron » Wed Sep 09, 2020 6:33 pm

Well done 😎👍

Kit
Tech Rep
Posts: 1267
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 14 times
Been thanked: 17 times

Re: Exhaust done

Post by Kit » Wed Sep 09, 2020 7:03 pm

:)

Kit

Dakota
Full Member
Posts: 108
Joined: Sat Aug 08, 2020 7:50 pm

Re: Exhaust done

Post by Dakota » Wed Sep 09, 2020 8:02 pm

Micron wrote:
Wed Sep 09, 2020 6:33 pm
Well done 😎👍
Thanks one job off the list .

Dakota
Full Member
Posts: 108
Joined: Sat Aug 08, 2020 7:50 pm

Re: Exhaust done

Post by Dakota » Wed Sep 09, 2020 8:04 pm

Kit wrote:
Wed Sep 09, 2020 7:03 pm
:)

Kit
Thanks, you was right definitely . cut it off the angle grinder was good fun . Tank girl style and sparks everywhere 🤣

jmx6
Full Member
Posts: 216
Joined: Thu Sep 06, 2018 9:27 pm
Been thanked: 2 times

Re: Exhaust done

Post by jmx6 » Wed Sep 09, 2020 8:08 pm

Good work, one step at a time and you’ll get it all done sooner than you think

Dakota
Full Member
Posts: 108
Joined: Sat Aug 08, 2020 7:50 pm

Re: Exhaust done

Post by Dakota » Wed Sep 09, 2020 11:24 pm

jmx6 wrote:
Wed Sep 09, 2020 8:08 pm
Good work, one step at a time and you’ll get it all done sooner than you think
Brakes are the next thing will take me to Xmas to save up for all the parts the whole lot want doing and a leaking master cylinder too . Got a few little jobs to do in-between time before the winter .

Kit
Tech Rep
Posts: 1267
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 14 times
Been thanked: 17 times

Re: Exhaust done

Post by Kit » Thu Sep 10, 2020 9:48 am

Dakota wrote:
Wed Sep 09, 2020 11:24 pm
jmx6 wrote:
Wed Sep 09, 2020 8:08 pm
Good work, one step at a time and you’ll get it all done sooner than you think
Brakes are the next thing will take me to Xmas to save up for all the parts the whole lot want doing and a leaking master cylinder too . Got a few little jobs to do in-between time before the winter .
Got a spare master cylinder here. You could put new seals in it ( available from Rockauto’s in the States). Then swap it over. Is your car an automatic :?:

Kit

Dakota
Full Member
Posts: 108
Joined: Sat Aug 08, 2020 7:50 pm

Re: Exhaust done

Post by Dakota » Thu Sep 10, 2020 5:40 pm

Kit wrote:
Thu Sep 10, 2020 9:48 am
Dakota wrote:
Wed Sep 09, 2020 11:24 pm
jmx6 wrote:
Wed Sep 09, 2020 8:08 pm
Good work, one step at a time and you’ll get it all done sooner than you think
Brakes are the next thing will take me to Xmas to save up for all the parts the whole lot want doing and a leaking master cylinder too . Got a few little jobs to do in-between time before the winter .
Got a spare master cylinder here. You could put new seals in it ( available from Rockauto’s in the States). Then swap it over. Is your car an automatic :?:

Kit
Hi Kit no mines a manual apparently there is 4 different ones available for mine it's a1992 ABS model apparently. Can you send me the link to the seals please and how easy are they to do

Kit
Tech Rep
Posts: 1267
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 14 times
Been thanked: 17 times

Re: Exhaust done

Post by Kit » Thu Sep 10, 2020 10:10 pm

Here you go
https://www.rockauto.com/en/catalog/maz ... r+kit,1840

I’ll find the master cylinder & take a Photo

Kit

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 12 guests