Spoiler

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Meadlo
Registered User
Posts: 269
Joined: Thu Sep 06, 2018 8:55 pm
Has thanked: 1 time

Re: Spoiler

Post by Meadlo » Fri Nov 16, 2018 9:21 pm

👍🏼 So with mine being a crossover. Does they kinda mean I can have either?

Meadlo
Registered User
Posts: 269
Joined: Thu Sep 06, 2018 8:55 pm
Has thanked: 1 time

Re: Spoiler

Post by Meadlo » Fri Nov 16, 2018 9:30 pm

That not! They 🤪

notoriousgoz
Registered User
Posts: 157
Joined: Thu Sep 06, 2018 9:34 pm
Has thanked: 29 times
Been thanked: 1 time

Re: Spoiler

Post by notoriousgoz » Sat Nov 17, 2018 7:21 pm

https://clc.nazwa.pl/Foty/FordProbespoilera.jpg This is the spoiler I have , still cannot post pics I’m afraid, it’s on eBay

mojo98
Tech Rep
Posts: 2630
Joined: Thu Sep 06, 2018 10:52 pm
Has thanked: 41 times
Been thanked: 55 times

Re: Spoiler

Post by mojo98 » Sat Nov 17, 2018 10:16 pm

notoriousgoz wrote:
Sat Nov 17, 2018 7:21 pm
https://clc.nazwa.pl/Foty/FordProbespoilera.jpg This is the spoiler I have , still cannot post pics I’m afraid, it’s on eBay
I can safely say that`s not a OEM spoiler ;)

mikenali
Registered User
Posts: 76
Joined: Mon Oct 22, 2018 12:31 pm
Been thanked: 1 time

Re: Spoiler

Post by mikenali » Sun Nov 18, 2018 11:16 am

I've fitted a few non-standard spoilers. We got some wide masking tape, and covered the tailgate. Then offer up the spoiler to the tailgate where you think it should be. The gently push it down. The bolts will make little marks on the masking tape. Then get your tape measure out, and measure the marks on the tape from the edge of the tailgate, then from the window, etc, etc. Once your happy that it's centred, then drill. :shock:

You'll have to drill through the bottom of the tailgate too, so it's a lot easier if you have a long drill bit. Also a small socket set, to get the nut up to the bolt on the spoiler once it's in position

Kit
Tech Rep
Posts: 3552
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 71 times
Been thanked: 115 times

Re: Spoiler

Post by Kit » Mon Nov 19, 2018 2:35 pm

Kit wrote:
Fri Nov 16, 2018 7:11 pm
Think I’ve got a Template, somewhere :?
Think it’s in my safety certs file at work, will have a look on Monday

Kit
Found the Template for an OME Spolier,

PM me if you want a copy.

Ta

Kit

Donner1
Registered User
Posts: 125
Joined: Fri Sep 07, 2018 9:27 am

Re: Spoiler

Post by Donner1 » Thu Nov 22, 2018 7:38 pm

Anyone got a pic of a early 1995 24v rear spoiler. Bought one that was supposed to be one but has brake light in it. Trusted the seller witnout seeing it first. Tia

mojo98
Tech Rep
Posts: 2630
Joined: Thu Sep 06, 2018 10:52 pm
Has thanked: 41 times
Been thanked: 55 times

Re: Spoiler

Post by mojo98 » Thu Nov 22, 2018 10:41 pm

this is a pic of the early spoiler on this car
Alpine green

https://www.ukpoc.co.uk/forum/viewtopic.php?f=16&t=256

Donner1
Registered User
Posts: 125
Joined: Fri Sep 07, 2018 9:27 am

Re: Spoiler

Post by Donner1 » Fri Nov 23, 2018 7:35 am

Thought so. I wanted to make sure. Thank you

Meadlo
Registered User
Posts: 269
Joined: Thu Sep 06, 2018 8:55 pm
Has thanked: 1 time

Re: Spoiler

Post by Meadlo » Fri Nov 23, 2018 7:12 pm

@Kit

Template arrived. Thanks very much.

Post Reply

Who is online

Users browsing this forum: eric56m and 19 guests