For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
-
cpt black
- Tech Rep
- Posts: 2867
- Joined: Fri Sep 07, 2018 8:28 am
- Location: chatham/kent
- Has thanked: 15 times
- Been thanked: 88 times
Post
by cpt black » Thu Sep 12, 2019 4:29 pm
When you do the front wishbones,because your outer strut bush to strut is Knackered
Leave the 2 bolts that hold the wish bone in place leave well alone just undo the the nut
and pull the the wish bone off the bush/bearing as will save grief when you Knacker the
Thread/bolt
-
jmx6
- Full Member
- Posts: 367
- Joined: Thu Sep 06, 2018 9:27 pm
- Been thanked: 8 times
Post
by jmx6 » Thu Sep 12, 2019 7:26 pm
This sounds like a hard learned lesson. I hope all is well again on the car.
-
Jon G 24V
- Tech Rep
- Posts: 662
- Joined: Fri Sep 07, 2018 8:05 pm
- Has thanked: 1 time
- Been thanked: 7 times
Post
by Jon G 24V » Thu Sep 19, 2019 7:37 pm
Good advice, been there and stripped the threads
Who is online
Users browsing this forum: No registered users and 30 guests