ABS

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
Ecky101
Full Member
Posts: 4
Joined: Sat Jul 15, 2023 9:03 pm
Been thanked: 4 times

ABS

Post by Ecky101 » Fri Mar 01, 2024 1:18 pm

I have a 1997 24V Probe with ABS Motor fault Fault code 53 .I have voltage at the connection to the motor .It did work for a few days when I put battery voltage direct to the motor .Now wont operate with direct 12 volts from the battery. Question can the ABS motor be removed from the ABS unit in situ withouth removing the ABS unt from the vehicle.
Top
mojo98
Tech Rep
Posts: 2627
Joined: Thu Sep 06, 2018 10:52 pm
Has thanked: 41 times
Been thanked: 55 times

Re: ABS

Post by mojo98 » Fri Mar 01, 2024 1:49 pm

Don't think you can just remove the motor from the abs unit, but I could be wrong, someone may come up with the answer, have you tried to reset the code, ( disconnect the battery and press the brake pedal for about 10 seconds)
It could be the abs relay? That's faulty,.
1st time I've heard of the motor fault
Top
cpt black
Tech Rep
Posts: 2824
Joined: Fri Sep 07, 2018 8:28 am
Has thanked: 15 times
Been thanked: 88 times

Re: ABS

Post by cpt black » Fri Mar 01, 2024 5:01 pm

I would say say its the relay gone bad ;)
Top
Ecky101
Full Member
Posts: 4
Joined: Sat Jul 15, 2023 9:03 pm
Been thanked: 4 times

Re: ABS

Post by Ecky101 » Fri Mar 01, 2024 6:54 pm

I was obtaining voltage at the supply to the motor .But I will try changing the relay.
Top
Post Reply

Return to “The Garage - Technical Forum”

Who is online

Users browsing this forum: No registered users and 21 guests