May be a “crossover’, & could have a Temic,
How long are are your bump strips
Kit
Locks, ignition barrels and immobilisers....
-
fuerte
- Registered User
- Posts: 884
- Joined: Fri Sep 07, 2018 10:10 am
- Has thanked: 22 times
- Been thanked: 1 time
Re: Locks, ignition barrels and immobilisers....
The lock you mention that doesnt work.Is it a door lock.They have a plastic part that breaks and drops down preventing you using the lock.It is possible to get the broken piece out and it will work fine.I wasted money on new locks until I discovered this.Also have you compared keys on ignition on doors are they different.I had a poorly cut key that worked in the door but not ignition.It is worth keeping best key then getting new keys cut as keys better cut from original.
-
Kit
- Tech Rep
- Posts: 3552
- Joined: Fri Sep 07, 2018 8:16 pm
- Has thanked: 71 times
- Been thanked: 115 times
Re: Locks, ignition barrels and immobilisers....
Long bump strips, so should be an early
,So, would have Bosch system,
Kit
-
Kit
- Tech Rep
- Posts: 3552
- Joined: Fri Sep 07, 2018 8:16 pm
- Has thanked: 71 times
- Been thanked: 115 times
-
Mondeo55
- Registered User
- Posts: 462
- Joined: Mon Sep 10, 2018 4:48 pm
- Has thanked: 24 times
- Been thanked: 4 times
Re: Locks, ignition barrels and immobilisers....
Fuerte; the boot lock is what's not working....appears to be seized. Not tried freeing it yet.
The car has had a replacement ignition barrel in its past hence the two keys. Will have to get a matching set. Small niggle but will drive me nuts.
The car has had a replacement ignition barrel in its past hence the two keys. Will have to get a matching set. Small niggle but will drive me nuts.
Who is online
Users browsing this forum: No registered users and 70 guests