Lost drive

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
Kit
Tech Rep
Posts: 3559
Joined: Fri Sep 07, 2018 8:16 pm
Location: Vange, Basildon
Has thanked: 71 times
Been thanked: 115 times

Lost drive

Post by Kit » Fri Apr 01, 2022 4:18 pm

Jan took our 24v out to do shopping on Wednesday, while I was away in Scotland working.
Well, she came back in a RAC van, as the car was recovered back.
Called in at the local shop, started to come back home, couldn’t engage gears.
Now back home , I’ll look at it & you have lost all drive :x
But, I only replaced the clutch last year :o

So, what gone wrong :?:
The clutch pedal feels good, the slave cylinder piston, pushing the clutch release bearing fork OK :?


What do I do now :|

Kit
Top
Jon G 24V
Tech Rep
Posts: 662
Joined: Fri Sep 07, 2018 8:05 pm
Has thanked: 1 time
Been thanked: 7 times

Re: Lost drive

Post by Jon G 24V » Fri Apr 01, 2022 4:28 pm

Hate to say it but it sounds like the box has to come off to check the Clutch at least.
If everything is ok then it sounds like it’s internals on the Box ☹️☹️☹️
Top
Kit
Tech Rep
Posts: 3559
Joined: Fri Sep 07, 2018 8:16 pm
Location: Vange, Basildon
Has thanked: 71 times
Been thanked: 115 times

Re: Lost drive

Post by Kit » Fri Apr 01, 2022 5:00 pm

Jon G 24V wrote: ↑
Fri Apr 01, 2022 4:28 pm
 Hate to say it but it sounds like the box has to come off to check the Clutch at least.
If everything is ok then it sounds like it’s internals on the Box ☹️☹️☹️
That’s what I think, as well. But it won’t be this weekend :cry:

Need to come up with a “Plan B”, so Jan can have a car :?:

Kit
Top
jrh
Full Member
Posts: 1051
Joined: Thu Sep 20, 2018 3:08 pm
Been thanked: 44 times

Re: Lost drive

Post by jrh » Fri Apr 01, 2022 5:07 pm

Do triple check that the slave cylinder IS pushing the clutch push rod , etc, properly before doing the big job.
Top
Micron
Site Admin
Posts: 3439
Joined: Thu Sep 06, 2018 6:08 pm
Location: South Norfolk
Has thanked: 62 times
Been thanked: 91 times

Re: Lost drive

Post by Micron » Fri Apr 01, 2022 5:54 pm

Marshmallow time 😎
Admin and Owner of this fine club 😎

Location : South Norfolk
Top
Kit
Tech Rep
Posts: 3559
Joined: Fri Sep 07, 2018 8:16 pm
Location: Vange, Basildon
Has thanked: 71 times
Been thanked: 115 times

Re: Lost drive

Post by Kit » Fri Apr 01, 2022 6:32 pm

jrh wrote: ↑
Fri Apr 01, 2022 5:07 pm
 Do triple check that the slave cylinder IS pushing the clutch push rod , etc, properly before doing the big job.
Done that, it was the first thing I look at :)

Kit
Top
Kit
Tech Rep
Posts: 3559
Joined: Fri Sep 07, 2018 8:16 pm
Location: Vange, Basildon
Has thanked: 71 times
Been thanked: 115 times

Re: Lost drive

Post by Kit » Fri Apr 01, 2022 6:34 pm

Micron wrote: ↑
Fri Apr 01, 2022 5:54 pm
 Marshmallow time 😎
That’s was “Plan A”, but thing have moved on to “Plan B”,
Will be reviled tomorrow ;)

Kit
Top
Micron
Site Admin
Posts: 3439
Joined: Thu Sep 06, 2018 6:08 pm
Location: South Norfolk
Has thanked: 62 times
Been thanked: 91 times

Re: Lost drive

Post by Micron » Fri Apr 01, 2022 6:35 pm

Kit wrote: ↑
Fri Apr 01, 2022 6:34 pm
Micron wrote: ↑
Fri Apr 01, 2022 5:54 pm
 Marshmallow time 😎
That’s was “Plan A”, but thing have moved on to “Plan B”,
Will be reviled tomorrow ;)

Kit
SBM?
Admin and Owner of this fine club 😎

Location : South Norfolk
Top
Kit
Tech Rep
Posts: 3559
Joined: Fri Sep 07, 2018 8:16 pm
Location: Vange, Basildon
Has thanked: 71 times
Been thanked: 115 times

Re: Lost drive

Post by Kit » Fri Apr 01, 2022 6:37 pm

Micron wrote: ↑
Fri Apr 01, 2022 6:35 pm
Kit wrote: ↑
Fri Apr 01, 2022 6:34 pm
Micron wrote: ↑
Fri Apr 01, 2022 5:54 pm
 Marshmallow time 😎
That’s was “Plan A”, but thing have moved on to “Plan B”,
Will be reviled tomorrow ;)

Kit
SBM?
No, that needs welding ,

Kit
Top
Kit
Tech Rep
Posts: 3559
Joined: Fri Sep 07, 2018 8:16 pm
Location: Vange, Basildon
Has thanked: 71 times
Been thanked: 115 times

Re: Lost drive

Post by Kit » Fri Apr 01, 2022 6:38 pm

It’s an quick fix, solution ;)

Kit
Top
Post Reply

Return to “The Garage - Technical Forum”

Who is online

Users browsing this forum: No registered users and 31 guests