A/C Drier Installation Probe 24v 1997
-
CLTXY00
- Registered User
- Posts: 14
- Joined: Wed Jun 09, 2021 8:25 am
- Has thanked: 6 times
- Been thanked: 1 time
A/C Drier Installation Probe 24v 1997
Has anyone managed to remove and replace the air conditioning drier without removing the front bumper. Any information on front bumper removal would be appreciated.
-
cpt black
- Tech Rep
- Posts: 2823
- Joined: Fri Sep 07, 2018 8:28 am
- Has thanked: 15 times
- Been thanked: 88 times
Re: A/C Drier Installation Probe 24v 1997
Just be carefull with the input/output lines wd 40 them so they dont twist 
Last edited by cpt black on Wed Aug 18, 2021 4:39 pm, edited 1 time in total.
-
Kit
- Tech Rep
- Posts: 3551
- Joined: Fri Sep 07, 2018 8:16 pm
- Has thanked: 71 times
- Been thanked: 115 times
Re: A/C Drier Installation Probe 24v 1997
Bumper removal
Bolts / ‘push pins’ across the front by the radiator
Two plastic screws, underneath
Two cross ties to chassis, behind the wheel splash guards
Two screws in to the wing, again behind the wheel splash guard.
Then pull it forward off the location blocks.
Don’t think I’ve missed anything
Kit
Bolts / ‘push pins’ across the front by the radiator
Two plastic screws, underneath
Two cross ties to chassis, behind the wheel splash guards
Two screws in to the wing, again behind the wheel splash guard.
Then pull it forward off the location blocks.
Don’t think I’ve missed anything
Kit
-
CLTXY00
- Registered User
- Posts: 14
- Joined: Wed Jun 09, 2021 8:25 am
- Has thanked: 6 times
- Been thanked: 1 time
Re: A/C Drier Installation Probe 24v 1997
Drier replaced. Job done! A/C works fine. These driers are a weak point in the A/C system and unfortunately are hard to get hold of. This is the second one that I have replaced on my 1997 V6 Probe.
Who is online
Users browsing this forum: Google [Bot] and 31 guests