UKPOC forums

3000 miles mate

Probably got some source of warm/hot water now going to
the IAC valve

Sounds like IAC valve where it has been stood up

Try KIT aka Duncan he should have some good spares for a 2.0l

Kit AKA Duncan should have some spares

Well put Malc,Great pic, now people will understand the difference, its not
the terminals,its the construction of the front of the battery

Wot mojo98 says is true,you will find its the construction of the battery front edge that fouls the
bonnet causing the lift on the bonnet

Hi Elaine clean the grease off and spray some wd 40 on then put some silicon grease on,
or once you have pulled the bonnet release and bonnet pops up push the release back in
and it will close shut without slamming it
PS
Also check the white clips are still intacted holding the cable

No need to take the front bumper off kev,take drivers side wheel off and the inner arch cover
to gain access,Mine was motor Knackered,jumped the wires no go, tried the usual flush etc no go,
could also be internal fault on the stalk

Yes Elaine its new and comes with the rubber gasket
Kev