UKPOC forums

24v V6 P reg but a 97 model. I'm fitting an lpg system to my car, according to the book the injector wires are, White/red trace feed wire no 1- Red/white trace to ecu no 3 - Blue/red trace to ecu no 5 - white, to ecu, mine is brown colour no 2 - Blue/white to ecu no 4 - Red/yellow trace to ecu no 6 ...

From what I saw, the fuse was just a blob on the end so maybe it decided to give up and retire. At least everything is back to normal

Hi I have a distributor off a 97/98 V6, the distributor gave up, so mojo gave me a second hand one to get me running. We have two units needing repair does anyone know a repairer, Thanks
Brookie 66j

You can buy gasket paper, usually the local parts shops are the best places to get it in for you.

Oil should be changed often, it has a shelf life of about two years then it starts to separate and loose its protective value

From what I've read the problem with E10 petrol is its destructive effect on the fuel lines and it goes off more quickly than current fuels so leaving our cars stood with it in will gum the lines up and make them harder to start, solution , keep using them and watch the rubber parts of the lines.

Yes the manifold has been off doing the rocker gaskets , we did try and squeeze the main hoses to see if we could get more air out but they were a bit hot, the heater hoses get hot as well, I'm going to loosen the front hose pipe to the throttle body to see is water comes out.

Him and that paint brush< i've told him to sling it

A side note on bleeding, if you use the pressure bleed kits like the easy bleed kit, it will save damaging the rubber seals and make life easier, drop one of the wheels to about 8psi and you can bleed to your hearts content

QH now do a ball joint with a circlip on top to stop this happening, much better than the press in version.

UKPOC forums

Search found 18 matches

Injector wiring

Re: Urgent help required

Distributor rebuilding

Re: Iac valve faulty?

Re: Oil

Re: Bad news at the pump

Re: Early 24v issues

Re: Couple of issues

Re: Help Please, No Brakes.

Re: It shouldn’t look like this !!