Hiya!
This might be a stupid question but when re-installing the air filter box and the air intake pipe, what is the best order to re-assemble? The AA guy took it apart and now im not sure exacrly hows best to assemble...I've screwed down the bottom of the filter box, reattached the air intake pipe to the engine and then was going to clip the top of the filter box back on. However, the actual rubber sticking out from the air filter is making getting the top of the box almost impossible to clip back on. I haven't done it before (still learning haha) and it took alot to just attach the pipe back onto the engine so thought it might be worth asking if that's the wrong order before trying to do it all again...
Its a 1997 24v.
Thanks
Verity
How to reassemble the air intake and filter box?
-
- Registered User
- Posts: 38
- Joined: Wed Oct 12, 2022 12:08 am
-
- Tech Rep
- Posts: 2796
- Joined: Fri Sep 07, 2018 8:28 am
- Has thanked: 15 times
- Been thanked: 88 times
Re: How to reassemble the air intake and filter box?
Lift the top of the airbox lid up slightly and push the tab,s on the left hand side fully in.that will
then cover the air filter rubber then clip the the lid down and reconnect front hose
then cover the air filter rubber then clip the the lid down and reconnect front hose
-
- Registered User
- Posts: 38
- Joined: Wed Oct 12, 2022 12:08 am
Re: How to reassemble the air intake and filter box?
Thanks thats worked, only problem now is it
won't start now Just replaced the distributor cap, leads are all in right and thought that was the only issue as it was completely worn. Cranks but just not starting?
won't start now Just replaced the distributor cap, leads are all in right and thought that was the only issue as it was completely worn. Cranks but just not starting?
-
- Tech Rep
- Posts: 2796
- Joined: Fri Sep 07, 2018 8:28 am
- Has thanked: 15 times
- Been thanked: 88 times
Re: How to reassemble the air intake and filter box?
On the unit from the airbox (rear as per picture 2 bands around unit) has the connector plug been relocated back in,it has a 5 pin plug
that points to the right of the unit towards the inner wing
picture to help
that points to the right of the unit towards the inner wing
picture to help
Who is online
Users browsing this forum: Google [Bot] and 11 guests